XZR8® 鑫眾潤
中國重汽 1001417199 渦輪增壓器進油管總成

中國重汽 1001417199 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件名稱Turbocharger Oil Feed Pipe Assembly
OEM製造商Sinotruk (CNHTC)
材質High-Temperature Alloy Steel Tubing with Steel Fittings
連線型別Banjo Fitting / Flare Fitting
進氣管螺紋尺寸M14 x 1.5 (Engine Block Side)
出口螺紋尺寸M12 x 1.5 (Turbocharger Inlet Side)
密封方式Copper Crush Washers
內部孔徑直徑1.0 - 1.5 mm (Flow Restrictor)
最大工作壓力1.5 MPa (217 PSI)
工作溫度範圍-40°C to +150°C
應用領域Heavy Duty Diesel Engine Lubrication System
淨重0.75 kg

製造號

  • 1001417199

主機廠號

  • 1001417199

發動機號

  • Weichai WP10
  • Weichai WP12
  • Weichai WP13
  • Sinotruk MC11
  • Sinotruk MC13

適配車型

  • Sinotruk Howo 371
  • Sinotruk Howo 336
  • Sinotruk Howo A7
  • Sinotruk Sitrak C7H
  • Sinotruk Hohan N7G
The 1001417199 turbocharger oil feed pipe assembly is a critical lubrication system component designed for Sinotruk Howo heavy duty commercial vehicles. It channels pressurized engine oil from the main gallery to the turbocharger center housing rotating assembly (CHRA), ensuring hydrodynamic bearing lubrication and cooling under high thermal loads. Constructed from high-temperature resistant steel tubing with crimped or brazed end fittings, the assembly incorporates restrictive orifices where required by OEM engineering to regulate flow rate and prevent bearing overspeed damage. End connections typically feature metric banjo fittings (M12x1.5 or M14x1.5) with copper sealing washers for leak-free sealing at the engine block and turbocharger inlet ports. This part corresponds to Sinotruk OEM part number 1001417199. It is engineered for direct fitment on Weichai WP10, WP12, WP13 and Sinotruk MC11, MC13 series diesel engines equipped with Holset or BorgWarner turbochargers. Regular inspection for carbonization, cracking, or restriction is recommended during scheduled maintenance intervals to prevent turbocharger failure.