XZR8® 鑫眾潤
Case 100554A1 行星架總成
Case 100554A1 行星架總成 - Image 2
Case 100554A1 行星架總成 - Image 3
1 / 3

Case 100554A1 行星架總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件型別Front Axle Planetary Assembly
元件Pinion Carrier
驅動配置4WD
材質Forged Iron
重量14.5 kg
包裝重量13.15 kg
包含內容Carrier, Planetary Gears, Needle Bearings, Thrust Washers, Snap Rings, O-Ring
製造商Carraro
OEM交叉參考Case 100554A1, Carraro 65643
包裝尺寸35 × 25 × 20 cm

製造號

  • 65643
  • 85806011

主機廠號

  • 100554A1

互換號

  • 100554A1-A
  • 65643-A
  • 85805981
  • 85805997
  • 100561A1
  • 100562A1
  • 100563A1
  • 238-6121

適配車型

  • Case 580L
  • Case 580SL
  • Case 580M
  • Case 580SM
  • Case 570LXT
  • Case 570MXT
  • Case 585G
  • Case 586G
  • Case 588G
  • New Holland U80
  • New Holland U80B
  • New Holland U80C
  • New Holland LV80
  • Case 660 Trencher
The 100554A1 planetary assembly serves as the forward pinion carrier in the front axle 4WD system. It integrates the planet carrier, planetary gears, needle bearings, thrust washers, snap rings, and sealing O-ring into a single service unit. Manufactured by Carraro to Case OEM specifications, the assembly transmits torque from the axle shaft to the wheel hub through planetary gear reduction. The carrier housing is constructed from forged iron for high fatigue resistance under heavy load cycles typical in backhoe loader and rough-terrain forklift applications. Direct replacement for Case OEM 100554A1 and cross-referenced to Carraro 65643. Compatible with Case 580 series backhoe loaders (L, SL, M, SM), 570 series loader landscapers (LXT, MXT), and 585G/586G/588G forklifts. Also fits New Holland U80, U80B, U80C, and LV80 models sharing the same Carraro axle platform. Installation requires standard axle service tools. Verify spline count and gear tooth profile against original carrier before assembly. Recommended to replace axle shaft seals and lubricate with specified gear oil during overhaul. Unit weight approximately 14.5 kg. Package weight 13.15 kg.