XZR8® 鑫眾潤
伊頓 101-1010-009 液壓擺線馬達
伊頓 101-1010-009 液壓擺線馬達 - Image 2
伊頓 101-1010-009 液壓擺線馬達 - Image 3
1 / 3

伊頓 101-1010-009 液壓擺線馬達


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
排量4.5 cu in/rev (73.7 cc/rev)
電機型別Low Speed High Torque (LSHT) Gerotor / Spool Valve
系列Char-Lynn H Series
安裝配置4 Bolt Flange, 1.75 in Pilot
軸尺寸1 in Straight Keyed (Woodruff Key)
埠連線#10 SAE O-Ring (7/8-14 UNF)
連續工作電流1,044 in-lb
最大持續壓力1800 PSI (124 bar)
最大峰值壓力2400 PSI (165 bar)
最大執行速度585 RPM
重量11.5 lbs (5.2 kg)
總長度6.6 in (167.6 mm)
高度3.87 in (98.3 mm)
總寬度3.31 in (84.1 mm)
最大工作溫度180°F (82°C)
粘度等級100 SUS (20 cSt) recommended

製造號

  • 101-1010-009
  • 101-1010
  • 1011010009
  • 1011010
  • MH0045BA01AA0000000000000AA00J

主機廠號

  • TB0080FS100AAAA
  • 702749AT

互換號

  • 151-2042
  • 1512042
  • 101-1558-009
  • 1011558009
  • 101-1558
  • 1011558
Technical specifications for the Eaton Char-Lynn H Series spool valve gerotor motor catalog number 101-1010-009. This low-speed high-torque (LSHT) motor delivers 4.5 cubic inches per revolution displacement with continuous torque rating of 1,044 in-lb. The motor features a 4-bolt flange mount with 1.75-inch pilot, 1-inch straight keyed output shaft, and #10 SAE O-ring ports. Model code MH0045BA01AA0000000000000AA00J identifies the specific configuration. Constructed with cast iron housing for durability in demanding industrial and mobile hydraulic applications. Material composition includes cast iron gerotor set and housing with hardened steel shaft. The three-zone pressure design optimizes efficiency and reduces wear. Compatible with mineral-based hydraulic fluids up to 180°F maximum operating temperature. Interchanges with multiple OEM and aftermarket part numbers for direct replacement capability.