XZR8® 鑫眾潤
特斯拉 1044354-00-A 前下控制臂總成
特斯拉 1044354-00-A 前下控制臂總成 - Image 2
1 / 2

特斯拉 1044354-00-A 前下控制臂總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
車輛上的放置位置Front Left Lower (LH)
元件型別Lower Control Arm / Compliance Link
含球關節Yes
包含襯套Yes
材質Forged Aluminum
表面處理E-coat and Powder Coating
適配型別Direct Replacement
建築Aluminum Arm with Steel Ball Joint
淨重4.5 kg
包裝尺寸45 × 22 × 18 cm

製造號

  • 179413
  • 1044354-00-A-AFT
  • TLAB-001
  • RK623778
  • NK5016608
  • EV80153
  • MS95668
  • K750958
  • K750959
  • P1044354-00-A

主機廠號

  • 1044354-00-A
  • 104435400A
  • 2188354-10-B

互換號

  • 179413
  • TLAB-001
  • RK623778
  • NK5016608
  • EV80153
  • MS95668
  • K750958
  • K750959
  • P1044354-00-A

適配車型

  • Tesla Model 3 2017-2023
  • Tesla Model Y 2020-2023
The Tesla 1044354-00-A is a front lower control arm assembly, also referred to as a compliance link, designed for the left-hand (driver side) front suspension. It connects the vehicle subframe to the steering knuckle, managing wheel motion and maintaining alignment angles under dynamic loads. The assembly features a forged aluminum construction for optimal strength-to-weight ratio and corrosion resistance. It comes pre-assembled with a high-strength steel ball joint and rubber bushings, ensuring direct installation without specialized pressing tools. Surface treatment includes electrophoretic coating (E-coat) supplemented by powder coating for enhanced environmental protection. This component is validated for direct fitment on Tesla Model 3 (2017-2023) and Model Y (2020-2023) platforms. Cross-reference interchange includes OEM alternate 2188354-10-B and aftermarket equivalents from Febi (179413), Meyle, Vaico, MOOG, Monroe, and Herth+Buss.