
坦能 1220238 尼龍盤刷總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 刷子直徑 | 14 in / 356 mm |
|---|---|
| 刷毛材料 | Nylon |
| 螺紋直徑 | 0.012 in, 0.020 in, 0.028 in (Variant Specific) |
| 離合器型別 | 6-Point Tennant Drive Plate |
| 應用型別 | Light Duty Scrubbing / Polishing |
| 表面處理 | Tile, Terrazzo, Epoxy, Smooth Concrete, Decorated Floors |
| 每臺機器數量 | 2 (Typical for 28 in Disc Deck) |
| 淨重 | 1.8 kg |
| 包裝尺寸 | 38 × 38 × 10 cm |
製造號
- 1220238
- 4037190
主機廠號
- 222321
互換號
- TN1220238
- TEN-1220238
- TNT1220238
- SSTNN-1220238
適配車型
- Tennant 5680
- Tennant 5700
- Tennant 7080
- Tennant 7100
- Tennant 7200
- Tennant T20
- Tennant 636
- Nobles EZ Rider
- Nobles EZ Rider HP
The Tennant 1220238 is a 14-inch (356 mm) diameter nylon disk scrub brush assembly engineered for use on Tennant and Nobles commercial floor scrubbing machines.
The brush block integrates a 6-point clutch plate for direct drive engagement. Filament material is nylon, available in soft filament diameters typically ranging from 0.012 to 0.028 inches depending on specific revision (superseded by 4037190).
This brush is rated for light-duty scrubbing and polishing applications on decorated, tile, terrazzo, epoxy-coated, or smooth concrete floors. It is not recommended for high-humidity or standing water conditions where polypropylene or abrasive filaments perform better.
The assembly serves as a direct replacement for OEM part numbers 222321 and 4037190. Compatible machines utilize 14-inch disc scrub decks, typically requiring two brushes per machine.








