XZR8® 鑫眾潤
濰柴 13062194 渦輪增壓器進油管總成

濰柴 13062194 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
OE參考WPB13062194
元件型別Turbocharger Oil Inlet Pipe Assembly
材質High-Temperature Alloy Steel Tubing
連線型別Flanged / Banjo Fitting with Bolt
最大工作壓力0.8 MPa (116 PSI)
工作溫度範圍-40°C to 150°C
密封方式Copper/Composite Gasket (Not Included)
表面處理Zinc Phosphate / Dacromet Coating
淨重0.85 kg
包裝尺寸48 × 12 × 6 cm

製造號

  • 13062194
  • WPB13062194

主機廠號

  • 13062194

發動機號

  • Weichai WP12
  • Weichai WD12
  • Weichai WD615
  • Weichai Landking Series

互換號

  • WPB13062194

適配車型

  • Sinotruk Howo Heavy Duty Trucks
  • Shacman Heavy Duty Trucks
  • FAW J6 Heavy Duty Trucks
  • Weichai Power Generator Sets
The 13062194 turbocharger oil inlet pipe assembly is a critical lubrication component designed for Weichai heavy-duty diesel engines. It channels pressurized engine oil from the main oil gallery to the turbocharger center housing rotating assembly (CHRA), providing essential lubrication and cooling for the turbine and compressor shaft bearings. Constructed from high-temperature resistant steel tubing with precision-formed flanges and banjo fittings, this assembly withstands engine oil pressures up to 0.8 MPa and operating temperatures exceeding 150°C. The design incorporates integrated sealing surfaces for copper or composite gaskets to prevent leakage under dynamic vibration conditions typical in commercial vehicle and construction machinery applications. This part serves as a direct replacement for Weichai OEM part number 13062194 (also referenced as WPB13062194). It is engineered to maintain strict dimensional tolerances for fitment on Weichai WP12, WD12, and WD615 engine platforms commonly installed in Sinotruk Howo, Shacman, and FAW J6 heavy-duty trucks, as well as Weichai industrial power generator sets. Regular inspection and replacement during turbocharger service intervals are recommended to prevent oil starvation and catastrophic turbocharger failure.