XZR8® 鑫眾潤
Toro 136-4190 前萬向輪軸承重建維修包
Toro 136-4190 前萬向輪軸承重建維修包 - Image 2
1 / 2

Toro 136-4190 前萬向輪軸承重建維修包


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
最大輪胎尺寸13x6.50-6
軸承配置Ball Bearing with Snap Ring / Tapered Roller Bearing
密封型別Felt Washer Grease Seal / Spring Loaded Seal
孔徑尺寸3/4 inch (19.05 mm), 5/8 inch (15.875 mm), 1/2 inch (12.7 mm) via Bushings
輪轂尺寸4.0 - 7.9 inch (101.6 - 200.7 mm) Centered
輪徑6 inch
動載額定值400 - 500 lbs (181 - 227 kg) per Wheel
軸承材料GCr15 Bearing Steel
驅動軸材質304 Stainless Steel (Upgraded Kits)
套件內容2 Bearings, 2 Seals, 2 Snap Rings, Spacers, Axle Sleeve (Select Kits)
淨重0.85 kg

製造號

  • 136-4190
  • 136-5590
  • 175-523
  • 1-633584
  • 1-633585

主機廠號

  • 136-4190
  • 136-5590
  • 109-9127
  • 109-9125
  • 103-0065
  • 103-5188
  • 103-0071
  • 103-0070
  • 103-0069
  • 126-5361
  • 1-633584
  • 1-633585
  • 103-3051
  • 103-2768
  • 140-4896
  • 145-0489
  • 126-7592
  • 163-3469
  • 163-3475

互換號

  • 175-523

適配車型

  • Toro Z Master 2000 Series
  • Toro Z Master 3000 Series
  • Toro Z Master 5000 Series
  • Toro Z Master 6000 Series
  • Toro Z Master 7000 Series
  • Toro Z Master Z286E
  • Toro Z Master Z287L
  • Toro Z Master Z288E
  • Toro Z Master Z500
  • Toro Z Master Z528
  • Toro Z Master Z560
  • Toro Z Master Z580
  • Toro Z Master Z580D
  • Toro Z Master Z587L
  • Toro Z Master Z588E
  • Toro TimeCutter
  • Toro Titan 5400C
  • Toro MyRIDE MR4800
  • Toro MyRIDE MR5400
  • Toro MyRIDE MR6000
  • Toro ZX4800
  • Toro X4850
  • Toro X5450
  • Toro XS5450
  • Toro ZX5400
  • Toro ZX6000
  • Exmark Lazer Z
  • Exmark Quest
  • Exmark Pioneer
  • Exmark Radius E-Series
This front caster wheel bearing rebuild kit is engineered for 13x6.50-6 wheel assemblies used on commercial zero-turn mowers. The kit contains two ball bearings with snap rings, two felt washer grease seals or spring-loaded seals, and necessary spacers to service one caster wheel. Bearings are manufactured from GCr15 bearing steel for high load capacity and resistance to contamination. Upgraded kits feature 304 stainless steel axle sleeves and spring-loaded seals for enhanced debris exclusion and corrosion resistance. Designed to replace OEM bearing and seal sets on Toro and Exmark zero-turn platforms with 3/4-inch, 5/8-inch, or 1/2-inch axle bores via included bushings. Hub length compatibility ranges from 4.0 to 7.9 inches centered. Load rating meets or exceeds 400-500 lbs dynamic capacity per wheel. Direct interchange for Toro OEM 136-4190, 136-5590, 109-9127, 109-9125, 103-0065, 103-5188, 126-5361, 1-633584, 1-633585, 140-4896, 145-0489 and Exmark equivalents.