XZR8® 鑫眾潤
丹佛斯 150-1221 OSPC 100 LS 液壓轉向總成
丹佛斯 150-1221 OSPC 100 LS 液壓轉向總成 - Image 2
1 / 2

丹佛斯 150-1221 OSPC 100 LS 液壓轉向總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
排量100 cm3/rev
額定流量8-12 L/min
最大壓力40 bar
旁通閥開啟壓力240 bar
埠尺寸1/2 BSP
安裝模式4 x M10 x 16 mm
重量(kg)5.34 kg
型別Open Center Non-Reaction Load Sensing
閥門配置Check Valve (P/LS), Relief Valve, Shock Valves, Suction Valves

製造號

  • 150-1221
  • 150-1231
  • 11202231
  • 150-1189
  • 150-1217
  • 151-1217
  • 150-8235

主機廠號

  • 150G6011
  • AL75360
  • 1695445M91

互換號

  • 101S-5T-100
  • HKUS100-5T
  • ORBITROL LS 100
  • 102S-5T-100

適配車型

  • Linde Forklift
  • John Deere 6200
  • John Deere 6300
  • John Deere 6400
  • John Deere 6500L
  • Massey Ferguson Tractor
  • Case IH Tractor
  • Ford Tractor
  • Fiat Tractor
The Danfoss OSPC 100 LS is a hydrostatic steering unit of the open-center non-reaction type with load sensing capability. It integrates a pilot-operated relief valve, shock valves, suction valves, and a check valve in the P-port and LS-port. The unit features a displacement of 100 cm3/rev and a recommended system flow of 8 to 12 L/min. Maximum operating pressure for the relief valve is rated at 175 bar with shock valves set at 240 bar. Maximum allowable back pressure is 40 bar. Port threads are 1/2 BSP. Mounting configuration utilizes four M10 bolts with 16 mm thread engagement. The unit weighs approximately 5.34 kg. It serves as a direct replacement for Danfoss part numbers 150-1231, 11202231, 150-1189, 150-1217, 151-1217, and 150-8235. Cross-references include aftermarket codes 101S-5T-100 and HKUS100-5T. Primary applications include agricultural tractors, construction excavators, wheel loaders, harvesters, forklifts, and forestry machinery requiring load-sensing hydraulic steering.