XZR8® 鑫眾潤
中國重汽 15102480P 渦輪增壓器進油管總成

中國重汽 15102480P 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
元件名稱Turbocharger Oil Feed Pipe / Oil Inlet Line
材質High-Pressure Seamless Steel Tubing with Forged Banjo Fittings
接頭型別Banjo Bolt / Banjo Eye (Both Ends)
螺紋規格M10 x 1.5 or M12 x 1.5 (Engine Block / Turbo Inlet Specific)
密封方式Copper Crush Washers (Included / Required)
工作壓力Up to 1.0 MPa (145 PSI)
應用引擎Weichai WD615 Euro II / Euro III
車輛平臺Sinotruk Howo 6x4 (ZZ3257, ZZ4257, ZZ1257 Series)
淨重0.85 kg
包裝尺寸55 × 15 × 5 cm

製造號

  • 15102480P

主機廠號

  • 15102480P
  • AZ15102480P

發動機號

  • Weichai WD615.47
  • Weichai WD615.69
  • Weichai WD615.87
  • Weichai WD615 Series

互換號

  • WD615-Turbo-Oil-Pipe
  • Howo-Turbo-Feed-Line-15102480P

適配車型

  • Sinotruk Howo 6x4 Dump Truck
  • Sinotruk Howo 6x4 Tractor Truck
  • Sinotruk Howo 6x4 Mixer Truck
  • Sinotruk Howo 371HP Series
The 15102480P turbocharger oil feed pipe is a critical lubrication system component designed for Weichai WD615 series diesel engines equipped in Sinotruk Howo heavy-duty trucks. It channels pressurized engine oil from the cylinder block to the turbocharger bearing cartridge, ensuring reliable lubrication and cooling of the turbine shaft assembly. Constructed from high-pressure seamless steel tubing with precision-formed banjo end fittings, this assembly withstands engine oil pressures up to 1.0 MPa and operating temperatures exceeding 120°C. The pipe routing is engineered to clear engine block castings, exhaust manifolds, and chassis components specific to the Howo 6x4 platform. Installation requires new copper sealing washers at both banjo connections to prevent leakage under dynamic pressure cycles. This part replaces the original equipment pipe susceptible to fatigue cracking, carbon blockage, or banjo bolt thread stripping during service intervals.