XZR8® 鑫眾潤
久保田 1J601-19362 氮氧感測器總成
久保田 1J601-19362 氮氧感測器總成 - Image 2
久保田 1J601-19362 氮氧感測器總成 - Image 3
久保田 1J601-19362 氮氧感測器總成 - Image 4
久保田 1J601-19362 氮氧感測器總成 - Image 5
久保田 1J601-19362 氮氧感測器總成 - Image 6
1 / 6

久保田 1J601-19362 氮氧感測器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
感測器位置Pre-Catalyst (Upstream)
加熱器電壓12V
螺紋尺寸M18 x 1.5
聯結器型別Kubota 4-Pin OEM Connector
工作溫度範圍-40°C to 850°C
重量0.30 kg

製造號

  • 1J601-19362
  • 1J60119362

主機廠號

  • 1J601-19362
  • 1J601-19360
  • 1J601-19361
  • 1J601-19363
  • 1J601-19364

發動機號

  • Kubota V3800-CR-TE4
  • Kubota V5009-CR-TE4

互換號

  • 5WK97369
  • SNS369
  • 82209969
  • SKNOX439
  • K1J601-19364

適配車型

  • Kubota M7-131
  • Kubota M7-132
  • Kubota M7-151
  • Kubota M7-152
  • Kubota M7-171
  • Kubota M7-172
  • Kubota M7-174S
  • Takeuchi TL12V2
  • Takeuchi TL12R2
The Kubota 1J601-19362 is a pre-catalyst (upstream) nitrogen oxide sensor designed for selective catalytic reduction (SCR) systems on Kubota M7 series agricultural tractors. It detects NOx concentration in exhaust gas upstream of the SCR catalyst, enabling the engine control unit to optimize urea dosing for emissions compliance. Constructed with a planar ceramic sensing element, stainless steel probe body, and high-temperature wiring harness with OEM-spec connector. The sensor operates on a 12V heater circuit typical of Kubota M7 electrical systems. It replaces superseded part numbers 1J601-19360, 1J601-19361, 1J601-19363, and 1J601-19364. Cross-references include Continental 5WK97369 and Takeuchi K1J601-19364 for TL12 series loaders.