XZR8® 鑫眾潤
博世 1J801-50540 吸油控制閥總成
博世 1J801-50540 吸油控制閥總成 - Image 2
博世 1J801-50540 吸油控制閥總成 - Image 3
1 / 3

博世 1J801-50540 吸油控制閥總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
閥型別Proportional Solenoid Suction Control Valve
工作電壓12V DC
功能Fuel Rail Pressure Regulation
安裝樣式Flange Mount on Supply Pump
適配泵型Denso Common Rail Supply Pump
排放標準Tier 4 Final
密封Viton O-Rings Included
淨重0.23 kg
包裝尺寸12 × 8 × 6 cm

製造號

  • 1J801-50540
  • 1J80150540
  • 1-465-ZS0-130

主機廠號

  • 1J801-50540
  • 1J801-97550

發動機號

  • Kubota V2403-CR
  • Kubota D1803-CR
  • Kubota V2403-CR-E4B
  • Kubota V2403-CR-E4

互換號

  • 1J801-97550
  • 1J80150540
  • 1-465-ZS0-130

適配車型

  • Kubota KX040-4
  • Kubota KX040-5
  • Kubota L3301DT
  • Kubota L3560
  • Kubota L3901
  • Kubota L4060
  • Kubota L4760
  • Kubota L5460
  • Kubota L6060
  • Kubota M5660
  • Kubota M6060
  • Kubota MX4800
  • Kubota MX5200
  • Kubota MX5800
The 1J801-50540 is a genuine Bosch-manufactured suction control valve (SCV) designed for Kubota common rail fuel injection systems. It mounts directly on the Denso-type high-pressure supply pump and meters fuel flow into the high-pressure circuit. The valve operates as a proportional solenoid, receiving PWM signals from the engine ECU to maintain target rail pressure across operating conditions. This assembly includes the valve body, solenoid coil, and sealing O-rings. It is calibrated for Kubota Tier 4 Final engines including V2403-CR, D1803-CR, and V2403-CR-E4B variants. The component is a critical wear item; failure symptoms include hard starting, low power, rail pressure deviation codes, and engine derate. Replacement requires proper torque specification and fuel system priming.