XZR8® 鑫眾潤
沃爾沃 20430583 燃油噴油器總成
沃爾沃 20430583 燃油噴油器總成 - Image 2
沃爾沃 20430583 燃油噴油器總成 - Image 3
沃爾沃 20430583 燃油噴油器總成 - Image 4
1 / 4

沃爾沃 20430583 燃油噴油器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件型別Electronic Unit Injector (EUI) / Common Rail
OEM製造商Delphi
額定電壓24V
燃油型別Diesel
最大噴射壓力1600 bar
噴嘴型別L025PBC (Delphi)
噴射控制方式Solenoid Actuated, ECM Coded (IQA/IMA)
安裝樣式Direct Cylinder Head Mount, Clamp Retained
排放標準Euro 3 / Euro 4
淨重1.3 kg
包裝尺寸22 × 12 × 10 cm

製造號

  • BEBE4C00001
  • BEBE4C00101
  • 5001866295

主機廠號

  • 20430583
  • VOE20430583
  • 8113941
  • 9020430583
  • 7420430583

發動機號

  • Volvo D12
  • Volvo D12C
  • Volvo D12D
  • Volvo D12F
  • Renault DXi 12

互換號

  • 21582096
  • 3803637
  • 20440388

適配車型

  • Volvo FH12
  • Volvo FM12
  • Volvo FM9
  • Volvo NH12
  • Volvo EC460B
  • Volvo EC360B
  • Volvo A35D
  • Volvo A40D
  • Renault Magnum DXi 12
The Volvo 20430583 is an Electronic Unit Injector (EUI) designed for the Volvo D12 series common rail diesel fuel systems. It features Delphi EUI technology integrating the injector nozzle, solenoid valve, and hydraulic actuation module into a single unit mounted directly on the cylinder head. The injector operates at high injection pressures up to 1600 bar, delivering precise fuel metering and atomization for Euro 3 and Euro 4 emission compliance. Constructed from high-strength alloy steel with hardened nozzle needle and control valve components, the assembly withstands extreme combustion cycle pressures and thermal loads. The solenoid actuator provides fast response times for pilot, main, and post-injection events controlled by the Engine Control Module (ECM). Critical wear surfaces are diamond-like carbon (DLC) coated to ensure durability under high-frequency actuation cycles. This part replaces Volvo OEM numbers VOE20430583, 8113941, 9020430583, and 7420430583. The Delphi manufacturing part numbers are BEBE4C00001, BEBE4C00101, and 5001866295. Common aftermarket interchange references include 21582096 and 3803637. Installation requires specific torque procedures for the hold-down clamp and high-pressure fuel connector. System priming and injector coding via diagnostic tool (VCADS) are mandatory after replacement to calibrate injection quantity compensation codes (IQA/IMA).