XZR8® 鑫眾潤
康明斯 213272 磁電式轉速感測器
康明斯 213272 磁電式轉速感測器 - Image 2
康明斯 213272 磁電式轉速感測器 - Image 3
康明斯 213272 磁電式轉速感測器 - Image 4
1 / 4

康明斯 213272 磁電式轉速感測器


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件名稱Magnetic Pickup (MPU) Speed Sensor
測量範圍50 - 5000 Hz
電感142 mH +/- 25%
線圈電阻300 Ohms Maximum
螺紋尺寸5/8-18 UNF-2A
螺紋長度80 mm (3.15 in)
攻絲孔徑37/64 inch
齒輪齒面距離0.028 - 0.042 in (0.71 - 1.07 mm)
線束配置3-Wire (Signal, Ground, Shield)
聯結器型別Packard / Metri-Pack 150 Series (Typical)
外殼材料Stainless Steel Body / Aluminum Alloy Housing
工作溫度範圍-40°C to +125°C (-40°F to +257°F)
認證Non-Hazardous (NOI, ICE/Auto)
淨重0.1 kg

製造號

  • 213272
  • 212061

主機廠號

  • 213272

發動機號

  • Cummins K19
  • Cummins KTA19
  • Cummins QSK19
  • Cummins K38
  • Cummins K50
  • Cummins N855
  • Cummins N14
  • Cummins NT855
  • Cummins L10
  • Cummins M11
  • Cummins ISM11
  • Cummins QSM11
  • Cummins ISX15
  • Cummins QSX15
  • Cummins ISB
  • Cummins QSB
  • Cummins QSC
  • Cummins 4B
  • Cummins 6B
  • Cummins B5.9
  • Cummins B6.7
  • Cummins QSF
  • Cummins ISF
  • Cummins ISG
  • Cummins V28

互換號

  • 212061
  • ES8831
  • MPU_213272
  • HM213272

適配車型

  • Cummins Generator Sets (Gensets)
  • Dongfeng Tianlong Heavy Trucks
  • Dongfeng Tianjin Heavy Trucks
  • Dongfeng Dalishen Heavy Trucks
  • Foton Auman Heavy Trucks
  • Foton Omak Medium Trucks
  • Yutong Buses
  • King Long Buses
  • Caterpillar Construction Machinery
  • Komatsu Excavators
  • Volvo Construction Equipment
  • Hitachi Excavators
  • Doosan Excavators
  • XCMG Construction Machinery
  • Sany Heavy Industry
  • SDLG Wheel Loaders
  • Zoomlion Concrete Machinery
  • Lovol Construction Equipment
  • Lonking Loaders
  • XGMA Machinery
  • Sunward Excavators
The Cummins 213272 Magnetic Pickup Unit (MPU) is a non-contact inductive speed sensor designed to detect rotational speed by sensing gear tooth passage on the engine flywheel or camshaft gear. It generates an AC voltage signal proportional to engine speed for the Electronic Control Module (ECM) or governor controller. Technical specifications include a measurement range of 50 to 5000 Hz, inductance of 142 mH +/- 25%, and a maximum coil resistance of 300 ohms. The sensor features a 5/8-18 UNF-2A thread with a thread length of 80 mm (3.15 in) and requires a proximity to gear teeth of 0.028 in (0.71 mm) minimum to 0.042 in (1.07 mm) maximum. The unit utilizes a 3-wire connector configuration (signal, ground, shield) distinguishing it from 2-wire variants such as the 3034572. This part serves as a direct OEM replacement for Cummins part number 213272 and supersedes or interchanges with 212061. It is engineered for compatibility with Cummins heavy-duty engine platforms including K19, KTA19, QSK19, K38, K50, N855, N14, NT855, L10, M11, ISM/QSM11, ISX/QSX15, and B/ISB/QSB series. Applications span industrial generator sets, heavy-duty trucks, construction machinery, and marine propulsion systems.