XZR8® 鑫眾潤
現代 21EN-32220 圓形油門馬達總成
現代 21EN-32220 圓形油門馬達總成 - Image 2
1 / 2

現代 21EN-32220 圓形油門馬達總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
額定電壓24V
線纜長度2.2 m (Short) / 3.2 m (Long)
聯結器型別5-Pin Round Connector
電機型別Stepping Motor / Electronic Actuator
線束配置Single Cable Round Head
應用領域Engine Throttle Control
防護等級IP67
安裝樣式Flange Mount to Governor Bracket
淨重1.5 kg
包裝尺寸22 × 15 × 12 cm

製造號

  • YNF01152
  • YNF17037G
  • CG-HYUNDAI-TM-42
  • CG-HYUNDAI-TM-43
  • 21EN-32220
  • 21EN-32300
  • 21EN-32340
  • 21EN-32360
  • 21EN-32200
  • 21EN-32260
  • 11E9-62010

主機廠號

  • 21EN-32220
  • 21EN-32300
  • 21EN-32340
  • 21EN-32360
  • 21EN-32200
  • 21EN-32260
  • 11E9-62010

互換號

  • 11E9-62010
  • 21EN32220
  • 21EN32300
  • 21EN32340
  • 21EN32360

適配車型

  • Hyundai R225-7
  • Hyundai R225-9
  • Hyundai R215-7
  • Hyundai R220-7
  • Hyundai R210-7
  • Hyundai R300-7
  • Hyundai R140-7
  • Hyundai R290-7
  • Hyundai R330-7
  • Hyundai R370-7
  • Hyundai R225LC-7
  • Hyundai R225-5
  • Hyundai R275-9
  • Hyundai R210-9
  • Hyundai R220-9
  • Hyundai R300-9
  • Hyundai R330-9
  • Hyundai R305-9
  • Hyundai R365-9
  • Hyundai R110-7
  • Hyundai R150-7
  • Hyundai R160-3
  • Hyundai R305-7
  • Hyundai R220-5
The 21EN-32220 throttle motor is a 24V DC stepping actuator designed for engine speed regulation on Hyundai 7-series and 9-series hydraulic excavators. It converts electrical signals from the ECU into precise mechanical throttle lever movement, ensuring stable idle and responsive acceleration under varying load conditions. The assembly features a round motor housing with a single output cable terminating in a 5-pin round connector. Cable length variants include 2.2 meters (short) and 3.2 meters (long) to accommodate different chassis routing requirements. The unit mounts directly to the engine governor bracket and interfaces with the accelerator pedal sensor via the machine harness. Construction utilizes high-temperature resistant engineering plastics and corrosion-protected ferrous alloys for the gear train and output shaft. Internal position feedback is provided by a non-contact rotary sensor, eliminating wear points associated with potentiometer designs. The motor is sealed to IP67 standards for resistance to dust, water ingress, and vibration typical in excavation environments. Cross-reference interchangeability covers Hyundai OEM part numbers 21EN-32220, 21EN-32300, 21EN-32340, 21EN-32360, 21EN-32200, 21EN-32260, and 11E9-62010. Compatible with R225-7, R225-9, R215-7, R220-7, R210-7, R300-7, R140-7, R290-7, R330-7, R370-7, R225LC-7, R225-5, R275-9, R210-9, R220-9, R300-9, R330-9, R305-9, R365-9, R110-7, R150-7, R160-3, R305-7, and R220-5 excavator models.