




1 / 5
NTK 22690-FU460 氧感測器總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 感測器型別 | Heated Zirconia Switching-Type Oxygen Sensor |
|---|---|
| 額定電壓 | 12V |
| 線數 | 4 |
| 聯結器型別 | Direct Fit OE Connector |
| 螺紋尺寸 | M18 x 1.5 |
| 淨重 | 0.2 kg |
製造號
- 22690-FU460
- 22690FU460
- NI22690-FU460
主機廠號
- 22690-FU460
- NI22690-FU460-OEM
- 22690-FU460-OEM
發動機號
- Nissan K21
- Nissan K25
互換號
- 15524
- 22690-AL600
- OZA603N2
- 22690-ED000
- 22690-AA381
- 22690-KA120
- 22690-AA940
- 22690-00Q1A
- 22690-00Q0L
- 22690-9F601
適配車型
- Nissan MUL02A20DV
- Nissan MUL02A20JV
- Nissan MAPL02A25DV
- Nissan MAPL02A25JV
- Komatsu FG25ST-14
- Caterpillar LPG Forklifts
- Mitsubishi LPG Forklifts
- TCM LPG Forklifts
- Doosan LPG Forklifts
- Bobcat LPG Forklifts
The NTK 22690-FU460 is a heated zirconia switching-type oxygen sensor designed for closed-loop fuel control on Nissan K21 and K25 LPG engines. It features a 4-wire configuration with an integrated heater for rapid warm-up and stable signal output at 12V system voltage. The sensor measures exhaust gas oxygen concentration and transmits voltage signals to the ECU to maintain optimal air-fuel ratio for emissions compliance and engine performance.
Constructed with a direct-fit OE connector and M18 x 1.5 thread pitch for seamless installation. This assembly replaces Nissan OEM 22690-FU460 and Doosan/Bobcat NI22690-FU460. Cross-references include Bosch 15524, NTK 22690-AL600, and Denso OZA603N2. Applicable to Nissan, Komatsu, Caterpillar, Mitsubishi, TCM, Doosan, and Bobcat forklift models equipped with K21 or K25 engines.
同系技術配件與配套推薦

斗山 D490720 水泵總成
D490720Doosan

小松 37B-1BR-5120 右側輪邊制動器總成
37B-1BR-5120Komatsu

日產 91H20-04940 點火線束總成
91H20-04940Nissan

日產 48511-FK001 轉向拉桿總成
48511-FK001Nissan

日產 46010-91K00 制動主缸總成
46010-91K00Nissan

日產 23731-4M506 凸輪軸位置感測器
23731-4M506Nissan

本田 57470-TA0-A02 ABS 車輪速度感測器
57470-TA0-A02Nissan

日產 22365-A080B 進氣歧管絕對壓力感測器總成
22365-A080BNissan
