XZR8® 鑫眾潤
現代 24100-23550 進氣凸輪軸總成

現代 24100-23550 進氣凸輪軸總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件名稱Intake Camshaft Assembly
材質Chilled Cast Iron (Induction Hardened Journals & Lobes)
發動機配置Inline-4 Cylinder
氣門機構配置DOHC, Dual CVVT, Chain Driven
Number Of Journals5
葉片數量4
位置感測器Integrated Tone Wheel
潤滑方式Pressure Fed via Bearing Clearance
淨重3.2 kg
包裝尺寸62 × 12 × 10 cm

製造號

  • 24100-23550

主機廠號

  • 24100-23550

發動機號

  • Hyundai Nu 2.0L GDI G4NC
  • Hyundai Nu 2.0L GDI G4NG
  • Kia Nu 2.0L GDI G4NC
  • Kia Nu 2.0L GDI G4NG

適配車型

  • Hyundai Tucson (LM) 2.0L GDI
  • Hyundai Sportage (SL) 2.0L GDI
  • Hyundai Elantra (MD/UD) 2.0L GDI
  • Hyundai Accent (RB) 2.0L GDI
  • Kia Sportage (SL) 2.0L GDI
  • Kia Optima (TF/QF) 2.0L GDI
The Hyundai 24100-23550 is an intake camshaft assembly designed for the Nu 2.0L GDI (Gasoline Direct Injection) engine series, specifically codes G4NC and G4NG. Manufactured from chilled cast iron with induction-hardened journals and lobes, it provides high wear resistance and fatigue strength under continuous high-RPM operation. This component integrates the camshaft position sensor tone wheel and is driven by the timing chain. It features four lobes operating the intake valves for the inline-four cylinder configuration. The journal diameter and lobe profiles are optimized for the dual CVVT (Continuously Variable Valve Timing) system, enabling precise intake valve timing control for improved fuel efficiency, emissions compliance, and torque curve shaping. Direct OEM replacement for Hyundai and Kia applications including Tucson, Sportage, Elantra, and Accent models equipped with the 2.0L Nu GDI powerplant. Supersedes prior revisions where applicable. Installation requires adherence to OEM torque specifications for bearing cap bolts and CVVT actuator assembly.