


1 / 3
Rule 25SA 自動艙底泵總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 額定電壓 | 12V DC |
|---|---|
| 流量 | 500 GPH (1893 LPH) |
| 輸出電流 | 1.9 A |
| 出口直徑 | 3/4 inch (19 mm) |
| 操作模式 | Automatic Electronic Sensing (Impeller Resistance) |
| Sensing Distance | 2.5 minutes |
| 電機保護 | Ignition Protected, Double Insulated, Overheat Protection |
| 軸材料 | Stainless Steel |
| Dry Run Capability | Non Burn-out Design |
| Backflow Prevention | Integrated Check Valve |
| 合規性 | ISO 8846 Marine Ignition Protection |
| 淨重 | 0.4 kg |
| 包裝尺寸 | 15 × 10 × 10 cm |
製造號
- 25SA
- 25SA-24
The Rule 25SA series is a 500 GPH (1893 LPH) automatic submersible bilge pump designed for 12V DC marine electrical systems. It utilizes electronic sensing technology based on impeller resistance to detect water presence, activating every 2.5 minutes for a one-second check cycle. This eliminates the requirement for a separate float switch.
The pump features an ignition-protected, double-insulated long-stack motor with a stainless steel shaft. It is engineered for non burn-out operation when running dry and includes an integrated backflow preventer to reduce hose drainage back into the bilge. The outlet port accommodates 3/4 inch (19 mm) ID hose. The unit complies with ISO 8846 marine ignition protection standards.








