XZR8® 鑫眾潤
德爾福 28343143 共軌燃油噴射泵
德爾福 28343143 共軌燃油噴射泵 - Image 2
德爾福 28343143 共軌燃油噴射泵 - Image 3
1 / 3

德爾福 28343143 共軌燃油噴射泵


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件名稱Common Rail Fuel Injection Pump
OEM編號28343143
製造商型號DFP3.4
交叉參考28447439, A6510702601, A6510701801
發動機應用Mercedes-Benz OM651 Series
燃油型別Diesel
系統最大壓力1800 bar
條件Brand New Aftermarket
質保期12 Months
淨重4.2 kg
包裝尺寸26 × 20 × 16 cm

製造號

  • DFP3.4
  • 28343143

主機廠號

  • 28343143
  • 28447439
  • A6510702601
  • A6510701801
  • A6510701601

發動機號

  • Mercedes-Benz OM651.901
  • Mercedes-Benz OM651.911
  • Mercedes-Benz OM651.921
  • Perkins 404D-22

互換號

  • 7788161
  • 000361040

適配車型

  • Mercedes-Benz A-Class W176
  • Mercedes-Benz B-Class W246
  • Mercedes-Benz C-Class W205
  • Mercedes-Benz CLA C117
  • Mercedes-Benz GLA X156
  • Mercedes-Benz Vito W447
The Delphi 28343143 is a high-pressure Common Rail fuel injection pump designed for the Mercedes-Benz OM651 engine family, widely deployed across the A-Class, B-Class, C-Class, CLA, and GLA model ranges. This unit corresponds to the Delphi DFP3.4 pump platform, renowned for its precise fuel metering and durability under high-pressure diesel cycles up to 1,800 bar. The pump assembly integrates a high-pressure pumping element, fuel metering valve (MPROP), and fuel temperature sensor within a compact aluminum housing. Critical OEM cross-references include Mercedes-Benz part numbers A6510702601, A6510701801, and A6510701601, alongside the Delphi service number 28447439. This aftermarket replacement is manufactured to OE specifications, ensuring exact fitment and performance parity for the OM651.901, OM651.911, and OM651.921 engine variants. Common failure modes addressed by this replacement include MPROP valve sticking, internal wear causing low rail pressure codes (P0087, P0088), and hard-start conditions. The unit is supplied as a complete assembly, ready for installation with included sealing washers. Technical support includes a 12-month warranty and compatibility with standard diagnostic calibration procedures via Xentry or Delphi DS150E tools. Applications extend to light commercial variants such as the Vito and Viano vans equipped with the 2.1L CDI powertrain.