XZR8® 鑫眾潤
康明斯 3096681 活塞總成
康明斯 3096681 活塞總成 - Image 2
康明斯 3096681 活塞總成 - Image 3
1 / 3

康明斯 3096681 活塞總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
孔徑直徑158.75 mm (6.250 in)
壓縮比15.5:1
引腳型別Offset Wrist Pin
活塞設計Articulated (Two-Piece)
冠部材料Nickel-Iron Alloy (Ni-Resist)
裙板材料Aluminum Alloy
環形槽配置3 Grooves (2 Compression, 1 Oil)
頂部環槽插入Ni-Resist
冷卻方式Oil Gallery Cooled
單位重量7.39 kg
包裝尺寸28 × 18 × 18 cm

製造號

  • 3096681
  • 3631245
  • M-3096681
  • M-3070707
  • 111359
  • CU3096681
  • K3631245

主機廠號

  • 3096681
  • 3631245

發動機號

  • Cummins KTA19
  • Cummins KTA38
  • Cummins KTA50
  • Cummins KT19
  • Cummins QSK19
  • Cummins QSK38
  • Cummins QSK50

互換號

  • M-3096681
  • M-3070707
  • 111359
  • CU3096681
  • K3631245

適配車型

  • Shougang SGA3722 Mining Truck
  • Terex TR100 Dump Truck
  • Terex TR60 Dump Truck
  • Terex TR35 Dump Truck
  • Hitachi Dump Truck
  • Sany Dump Truck
  • Hyundai Excavator
  • Marine Generator Sets
  • Industrial Power Units
The Cummins 3096681 piston assembly is an articulated design featuring an aluminum alloy skirt with a nickel-iron alloy crown insert, designed for the 159 mm (6.250 in) bore K-series engines. It utilizes an offset wrist pin configuration to reduce piston slap and optimize combustion efficiency at a 15.5:1 compression ratio. The piston body incorporates a Ni-Resist ring carrier for the top compression ring groove, enhancing durability under high thermal loads. This component serves as a direct replacement for Cummins OEM part numbers 3096681 and 3631245, commonly referenced in overhaul kits 3631245 and 5473168. The assembly is compatible with Cummins KT19, KTA19, KTA38, KTA50, QSK19, QSK38, and QSK50 engine platforms across industrial, marine, mining, and power generation sectors. Typical applications include Shougang SGA3722 mining trucks, Terex TR100/TR60/TR35 haul trucks, Hitachi and Sany dump trucks, and marine generator sets. The piston is supplied as a body only; rings, pin, and retainers are sourced separately or via corresponding cylinder kits. Manufacturing standards meet or exceed OEM specifications for material integrity, dimensional accuracy, and heat treatment.