XZR8® 鑫眾潤
東風 3615010-K57J0 後處理控制模組總成
東風 3615010-K57J0 後處理控制模組總成 - Image 2
1 / 2

東風 3615010-K57J0 後處理控制模組總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
額定電壓24V DC
功能SCR Aftertreatment Control / Urea Dosing / NOx Sensor Monitoring
通訊協議J1939 CAN Bus
工作溫度範圍-40°C to +85°C
防護等級IP67
聯結器介面Bosch 120-pin Automotive Connector
排放標準符合性China IV / Euro IV
淨重0.85 kg
包裝尺寸17 × 17 × 7 cm

製造號

  • 3615010-K57J0
  • 3615010-T68M4
  • 3615010-TL381
  • 3615010-T25FD
  • 3615010-TF980
  • 3615010-KJ1QB
  • 3615010-E9172
  • CM1880

主機廠號

  • 3615010-K57J0
  • 3615010-T68M4
  • 3615010-TL381
  • 3615010-T25FD
  • 3615010-TF980
  • 3615010-KJ1QB
  • 3615010-K14N0
  • 3615010-E81B0
  • 4354329

發動機號

  • Cummins ISLe
  • Cummins ISL8.9
  • Cummins ISBe
  • Cummins ISLe EU4
  • Cummins ISLe EU3

互換號

  • ACM-CM1880
  • DCU-SCR-CM1880
  • Sanfeng-3615010

適配車型

  • Dongfeng Tianlong
  • Dongfeng Tianjin
  • Dongfeng Kinland
  • Dongfeng GX
  • Yutong Bus
  • Kinglong Bus
The 3615010-K57J0 is an electronic control unit (DCU/ACM) designed for the selective catalytic reduction (SCR) aftertreatment system on Dongfeng heavy-duty trucks compliant with China IV emission standards. It controls urea injection dosing, monitors nitrogen oxide (NOx) sensor signals, and communicates via J1939 CAN bus with the engine ECU. The unit integrates the CM1880 architecture platform commonly supplied by Bosch for Cummins ISLe and ISL8.9L engine applications. This assembly serves as a direct replacement for multiple Dongfeng OE part number variants including 3615010-T68M4, 3615010-TL381, 3615010-T25FD, and 3615010-TF980. It is engineered for 24V vehicle electrical systems and rated for extended operating temperature ranges typical of commercial vehicle under-hood or frame-rail mounting locations. The housing provides IP67 ingress protection against dust and water jets.