XZR8® 鑫眾潤
康明斯 3804897 發動機大修密封墊包
康明斯 3804897 發動機大修密封墊包 - Image 2
1 / 2

康明斯 3804897 發動機大修密封墊包


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
套件型別Full Overhaul Gasket Set (Upper + Lower)
發動機應用Cummins 6BT 5.9L 12-Valve
氣缸蓋墊材料Multi-Layer Steel (MLS)
氣閥蓋墊圈材料Molded Rubber / Cork-Rubber Composite
密封材料Fluoroelastomer (FKM) Unitized Assembly
墊片型別One-Piece Molded Rubber with Steel Carrier
含墊片Yes
包裝內容Head Gasket, Lower Set, Valve Cover, Intake/Exhaust Manifold, Oil Pan, Timing Cover, Seals, O-Rings
淨重4.5 kg
包裝尺寸45 x 35 x 20 cm

製造號

  • 3804897
  • 3802376
  • 3802363
  • 3802364
  • 3802226
  • OTTO 3804897
  • Merakm 6BT-K1
  • Merakm 6BT-K2

主機廠號

  • 3804897
  • 3802376
  • 3802363
  • 3802364
  • 3802226
  • 3802029
  • 3283335

發動機號

  • Cummins 6BT
  • Cummins 6BTA
  • Cummins 6BT5.9
  • Cummins 6BT5.9-G1
  • Cummins 6B
  • Cummins B5.9
  • Cummins 6D102
  • Cummins S6D102

互換號

  • HCCIK96196
  • 131404
  • 131405
  • 6BT-K1
  • 6BT-K2
  • S-80367
  • 19024

適配車型

  • Dongfeng Tianlong
  • Komatsu PC200-8
  • Hitachi ZX200-3
  • Dodge Ram 5.9L (1989-1998)
  • Cummins Industrial Generator Sets
  • Marine Propulsion 6BT5.9-M
  • Agricultural Tractors (Case IH, New Holland)
  • Excavators (Various OEMs)
This overhaul gasket kit provides a comprehensive sealing solution for Cummins 6BT 5.9L 12-valve diesel engines. The kit encompasses both upper and lower gasket sets, covering cylinder head, valve cover, intake and exhaust manifold, oil pan, timing cover, front and rear crankshaft seals, water pump, thermostat housing, and all critical O-rings and seals required for a full engine overhaul. Components are manufactured to OEM dimensional specifications using multi-layer steel (MLS) for the head gasket, high-temperature graphite composites, and fluoroelastomer (FKM) or silicone rubber for dynamic seals to ensure resistance to engine oil, coolant, and combustion gases. The kit corresponds to Cummins OE part numbers 3804897, 3802376 (lower set), 3802363/3802364 (upper set), and 3802226. It is engineered for the 6B, 6BT, 6BTA, and 6BT5.9-G1 engine series with 12-valve configuration. Verification of engine serial number (ESN) and piston protrusion specifications is required prior to assembly to ensure correct head gasket thickness selection (standard or 0.25mm oversize). Installation must follow Cummins service manual torque sequences and sealant application guidelines for joint integrity.