XZR8® 鑫眾潤
National 38X55X7 TC型旋轉軸油封
National 38X55X7 TC型旋轉軸油封 - Image 2
National 38X55X7 TC型旋轉軸油封 - Image 3
National 38X55X7 TC型旋轉軸油封 - Image 4
1 / 4

National 38X55X7 TC型旋轉軸油封


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
內徑38 mm
外徑55 mm
寬度7 mm
密封型別TC (Double Lip, Rubber Covered OD)
唇部材料NBR (Nitrile Butadiene Rubber)
殼體材料Carbon Steel (SAE 1008-1010)
彈簧材料Carbon Steel Garter Spring
工作溫度範圍-40°C to +120°C
最大壓力0.3 bar
最大表面速度10 m/s
設計標準DIN 3760 / ISO 6194-1
淨重0.04 kg
包裝尺寸10 × 10 × 2 cm

製造號

  • 38X55X7
  • TC38X55X7
  • 38X55X7TC
  • SOM02990
  • OSS69784

主機廠號

  • 402337N
  • 62213-115-0000

互換號

  • Timken 38X55X7
  • SKF 38X55X7 HMS5 V
  • NOK 38X55X7
  • CR 38X55X7
  • Federal-Mogul 38X55X7
The National 38X55X7 is a metric TC profile rotary shaft seal engineered with a rubber-covered outer diameter and dual sealing lips. The primary lip retains lubricants while the auxiliary dust lip excludes external contaminants. A carbon steel garter spring maintains constant radial load on the shaft. The metal case provides structural rigidity for press-fit installation into housing bores per ISO 6194-1 tolerances. Constructed from NBR (Nitrile Butadiene Rubber) with a carbon steel case and spring, this seal operates effectively in mineral oils and greases within a temperature range of -40°C to +120°C. It is rated for low-pressure applications up to 0.3 bar and surface speeds up to 10 m/s. The dimension set 38 mm shaft diameter, 55 mm bore diameter, and 7 mm width conforms to DIN 3760 Type TC standards for general industrial, automotive, and heavy machinery rotating equipment.