XZR8® 鑫眾潤
英格索蘭 39311519 軸油封
英格索蘭 39311519 軸油封 - Image 2
英格索蘭 39311519 軸油封 - Image 3
1 / 3

英格索蘭 39311519 軸油封


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
軸徑107.95 mm (4.250 in)
外徑133.5 mm
截面厚度9.5 mm
密封型別Dual-Lip Rotary Shaft Seal
唇部材料PTFE (Polytetrafluoroethylene)
殼體材料Carbon Steel
工作溫度範圍-40°C to 200°C
最大表面速度30 m/s
最大壓差範圍A-B-H0.5 bar
淨重0.15 kg
包裝尺寸15 × 15 × 5 cm

製造號

  • 39311519

主機廠號

  • 39311519

適配車型

  • Ingersoll Rand HPE100-2S
  • Ingersoll Rand EPE100-2S
  • Ingersoll Rand XFE100-2S
  • Ingersoll Rand HPE125-2S
  • Ingersoll Rand EPE125-2S
  • Ingersoll Rand XFE125-2S
  • Ingersoll Rand HXPE125-2S
  • Ingersoll Rand HPE150-2S
  • Ingersoll Rand EPE150-2S
  • Ingersoll Rand XFE150-2S
  • Ingersoll Rand HXPE150-2S
  • Ingersoll Rand HPE200-2S
  • Ingersoll Rand EPE200-2S
  • Ingersoll Rand XFE200-2S
  • Ingersoll Rand ML75-2S
  • Ingersoll Rand ML90-2S
  • Ingersoll Rand MH132-2S
  • Ingersoll Rand MH160-2S
  • Ingersoll Rand SSR 250-2S WC
  • Ingersoll Rand SSR M90
  • Ingersoll Rand SSR M110
  • Ingersoll Rand SSR M132
  • Ingersoll Rand SSR M160
  • Ingersoll Rand D390INRi-A
  • Ingersoll Rand MU 132D
The Ingersoll Rand 39311519 shaft oil seal is a precision-engineered sealing component designed for rotary screw air compressor air ends. It utilizes a dual-lip PTFE (polytetrafluoroethylene) construction to maintain effective sealing between the rotor shaft and compressor housing under continuous high-speed rotation and elevated temperature conditions. This seal accommodates a shaft diameter of 107.95 mm (4.250 inches) with an outside diameter of 133.5 mm and a cross-section width of 9.5 mm. The PTFE lip material provides low friction coefficients, chemical resistance to synthetic compressor lubricants, and thermal stability across the operating envelope of industrial screw compressors. The part serves as a direct replacement for Ingersoll Rand OEM part number 39311519 and is installed during scheduled air end overhauls or when shaft seal leakage is detected. Proper installation requires clean mounting surfaces, correct lubrication of sealing lips, and adherence to specified torque values for retainer fasteners to prevent premature failure.