


1 / 3
久保田 3C011-41680 前橋後支架襯套
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 內徑 | 60 mm |
|---|---|
| 外徑 | 64 mm |
| 高度 | 40 mm |
| 位置 | Front Axle Rear Bracket |
| 重量 | 0.18 kg |
| 包裝尺寸 | 10 × 10 × 6 cm |
製造號
- 3C011-41680
主機廠號
- 3C011-41680
互換號
- E-3C011-41680
適配車型
- Kubota M5040HD
- Kubota M5140HD
- Kubota M6040HD
- Kubota M7040
- Kubota M6040
- Kubota M5040
- Kubota M135GX
- Kubota M135X
- Kubota M4N-071
- Kubota M5N-091
- Kubota M5N-111
- Kubota M6-141
- Kubota M59
- Kubota M62
- Kubota M4D-061
- Kubota M5660SUHD
- Kubota M6060
- Kubota M7060
- Kubota M8540
The Kubota 3C011-41680 is a front axle rear bracket bushing designed for Kubota M-series agricultural tractors. It serves as a critical pivot interface between the front axle assembly and the tractor chassis frame, accommodating articulation and load transfer during steering and field operation.
Engineered to OEM specifications, this bushing features an inner diameter of 60 mm, outer diameter of 64 mm, and a height of 40 mm. It is constructed from hardened steel with a wear-resistant surface treatment to withstand high radial loads and abrasive conditions typical in agricultural environments. The component is a direct replacement for the original equipment bushing installed on the rear bracket of the front axle swing frame.
Compatible with a wide range of Kubota tractors including M5040HD, M5140HD, M6040HD, M7040, M6040, M135GX, M135X, and M4/M5/M6 series models equipped with front-wheel drive. Regular inspection and replacement are recommended to maintain front axle alignment and steering precision.
同系技術配件與配套推薦

久保田 3B291-17300 冷卻液膨脹壺總成
3B291-17300Kubota

久保田 3C001-91232 右側提升拉桿總成
3C001-91232Kubota

久保田 1J700-22012 連桿總成
1J700-22012Kubota

久保田 16241-22012 連桿總成
16241-22012Kubota

久保田 251510600 推杆總成(6支裝)
25-15106-00Kubota

久保田 5001902 連桿總成
5001902Kubota

久保田 19013-15110 氣門推杆總成
19013-15110Kubota

久保田 15694-22010 連桿總成
15694-22010Kubota
