XZR8® 鑫眾潤
久保田 3C041-80140 PTO 輸出軸總成
久保田 3C041-80140 PTO 輸出軸總成 - Image 2
久保田 3C041-80140 PTO 輸出軸總成 - Image 3
1 / 3

久保田 3C041-80140 PTO 輸出軸總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
額定速度540 RPM
Spline Configuration6T / 26T
Implement Spline6 Spline x 1-3/8 in
Gearbox Spline26 Teeth
螺紋尺寸M30
總長度225 mm (10.5 in)
材質High-Quality Heat-Treated Alloy Steel
重量2.5 kg
零件型別PTO Output Shaft
應用領域Transmission Driveline / Power Take-Off

製造號

  • 3C041-80140
  • 3C04180140
  • 5-18-124-08
  • E-3C041-80140
  • AI-A-3C041-80140

主機廠號

  • 3C041-80140

互換號

  • 5-18-124-08
  • E-3C041-80140
  • AI-A-3C041-80140

適配車型

  • Kubota M5040
  • Kubota M5140
  • Kubota M6040
  • Kubota M6060
  • Kubota M7040
  • Kubota M7060
  • Kubota M8540
  • Kubota M4-071HDC12
The Kubota 3C041-80140 is a power take-off (PTO) output shaft designed for the transmission driveline of Kubota M-series utility tractors. It transmits engine torque from the transmission to the rear PTO stub shaft at a rated speed of 540 RPM. The shaft features a dual-spline configuration: 6 teeth (6T) on the implement connection end (1-3/8 inch standard) and 26 teeth (26T) on the gearbox engagement end. It incorporates an M30 thread for secure retention. Overall length is 225 mm (10.5 inches). Constructed from high-quality heat-treated alloy steel to withstand cyclic torsional loads in agricultural tillage, mowing, and baling applications. This component replaces Kubota OEM part number 3C041-80140. Cross-references include aftermarket numbers 5-18-124-08, E-3C041-80140, and AI-A-3C041-80140. Associated seal kit components include shaft seals 5-08-123-20 and 33740-80290. Fitment spans multiple sub-model variants including DT, DTC, F, FC, HD, and HDC configurations across the M5040, M5140, M6040, M6060, M7040, M7060, M8540, and M4-071HDC12 series.