

1 / 2
通用 4000W 48V 純正弦波逆變器
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 額定功率 | 4000W |
|---|---|
| 峰值功率 | 8000W (20s) |
| 額定輸入電壓 | 48V DC |
| 電壓範圍 | 40-60V DC |
| 輸出電壓 | 120V AC RMS |
| 波形輸出通道 | Pure Sine Wave |
| 總諧波失真 | < 3% |
| 工作頻率 | 50/60 Hz (Selectable) |
| 效率 | 92% |
| 報警輸出 | 42V DC |
| 脫扣電壓 | 40V DC |
| 高壓端子 | 60V DC |
| 過流保護 | Electronic + Fuse |
| 保護電路 | Electronic |
| 熱保護 | Automatic Shutdown |
| 冷卻方式 | Forced Air (Thermostatic Fan) |
| 隔離方式 | Low Frequency Transformer (Galvanic Isolated) |
| 直流鏈路電壓 | M8/M10 Terminal Block |
| 電氣連線 | Hardwire Terminal Block + GFCI Outlets |
| 工作溫度範圍 | -20°C to 50°C (-4°F to 122°F) |
| 認證 | CE, RoHS (Typical) |
| 淨重 | 12.5 kg |
| 包裝尺寸 | 42 × 22 × 15 cm |
This 4000W pure sine wave power inverter converts 48V DC battery voltage into stable 120V AC output suitable for sensitive electronics, motor loads, and residential appliances.
The unit delivers 4000W continuous power with a 8000W surge capacity for 20 seconds to handle high inrush currents from compressors and pumps.
Output waveform total harmonic distortion (THD) is less than 3 percent.
The inverter operates at a selectable output frequency of 50Hz or 60Hz via DIP switch.
Input voltage range spans 40V to 60V DC with low voltage alarm at 42V and shutdown at 40V, high voltage shutdown at 60V.
Protection functions include overload, short circuit, over temperature, reverse polarity (internal fuse), and AC backfeed protection.
Cooling is managed by thermostatically controlled forced-air fans.
The low-frequency transformer topology provides galvanic isolation between DC input and AC output.
Enclosure is aluminum alloy for heat dissipation and durability.
Terminal block accepts heavy gauge cable for DC input; AC output via hardwire terminal block and GFCI protected receptacles.








