

1 / 2
霍爾塞特 4040073 渦輪增壓器總成 HX83
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 渦輪增壓器框架 | Holset HX83 |
|---|---|
| 霍爾斯特型號 | HE851 |
| 壓縮機誘導器直徑 | 102 mm |
| 壓縮機擴壓器直徑 | 140 mm |
| 渦輪誘導器直徑 | 127 mm |
| 渦輪出口直徑 | 114 mm |
| 渦輪機外殼A-R | 1.32 |
| 洩壓閥型別 | Integrated Pneumatic Actuator (Select Models) |
| 壓縮機進氣連線 | Clamp / Silencer Port |
| 壓縮機出口連線 | V-Band / Flange |
| 渦輪進氣連線 | V-Band |
| 渦輪出口連線 | V-Band / Flange |
| 油口螺紋 | M22 x 1.5 / Flange |
| 油口螺紋 | Flange (4 Bolt) |
| 冷卻液介面 | Yes (Water-Cooled CHRA) |
| 旋轉方向 | Clockwise (Viewed from Compressor) |
| 淨重 | 65 kg |
| 包裝尺寸 | 65 × 50 × 50 cm |
製造號
- 4040073
- 4040074
- 4040075
- 8200072
- 2843364
- 4090064
- HE851
主機廠號
- 4040073
- 4040074
- 4040075
- 2843364
- 4090064
發動機號
- Cummins QSK60
- Cummins QSK60-G
- Cummins QSK60-M
- Cummins QSK60-L
互換號
- 4972818
- FS1006
適配車型
- Komatsu 930E Haul Truck
- Komatsu 980E Haul Truck
- EMD SD70ACe Locomotive
- GE ES44AC Locomotive
- Marine Propulsion Systems
- Power Generation Generator Sets
The Holset HX83 frame turbocharger assembly (Part Number 4040073) is designed for the Cummins QSK60 60-liter V12/V16 diesel engine platform. This unit features a high-efficiency compressor wheel and turbine wheel configuration optimized for the high mass flow rates of the QSK60 engine series, typically rated between 2000 and 2850 kW. The center housing rotating assembly (CHRA) utilizes a full-floating bronze bearing system with piston ring seals for oil control under extreme thermal loads. The turbine housing incorporates a V-band clamp connection for secure mounting and thermal expansion management. The compressor cover features a silencer port for noise attenuation. This turbocharger is a critical component for maintaining engine performance, emissions compliance, and fuel economy in severe duty cycles.
Cross-reference interchangeability includes Cummins part numbers 4040074, 4040075, 8200072, 2843364, and 4090064. The unit is commonly identified by the Holset model designation HE851 or HX83. Applications span mining haul trucks such as the Komatsu 930E and 980E, diesel-electric locomotives including EMD SD70ACe and GE ES44AC, marine propulsion packages, and stationary power generation generator sets. Installation requires verification of the specific engine configuration (e.g., wastegate actuator presence, turbine housing A/R ratio) to ensure correct match with the engine control module (ECM) calibration.








