XZR8® 鑫眾潤
Holset 4045184 HX35W 渦輪增壓器總成

Holset 4045184 HX35W 渦輪增壓器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
渦輪增壓型號HX35W
壓縮機誘導器直徑52-54 mm
渦輪誘導器直徑70 mm
渦輪機外殼A-R12 cm² Twin Entry
渦輪進氣法蘭T4 Divided
壓縮機出口直徑3 in (76 mm)
洩壓閥型別Pneumatic Actuated Internal
洩壓閥設定20 psi (1.4 bar)
軸承系統Journal Bearing Wet Float
潤滑油冷卻Yes
旋轉方向Clockwise
淨重12.5 kg
包裝尺寸40 × 30 × 30 cm

製造號

  • 4045184
  • 4045877
  • 4033987H
  • 3771454
  • 4049091
  • 4047313
  • W1306150040A

主機廠號

  • 2882034
  • 4033987
  • 4035199
  • A3960454

發動機號

  • Cummins B160
  • Cummins 6BTA160
  • Cummins 6BT5.9
  • Cummins ISB 5.9L

互換號

  • SW-0986
  • C4045184

適配車型

  • Dongfeng Cummins Heavy Duty Trucks
  • Komatsu PC220 Excavator
  • FAWDE Trucks
The Holset HX35W model 4045184 is a wastegated turbocharger designed for Cummins B160 and 6BTA160 5.9-liter diesel engines. It utilizes a journal bearing system with wet float oil cooling and features a pneumatic actuator for boost control. The turbine housing incorporates a 12 cm² twin-entry (divided) volute with a T4 flange configuration, optimizing pulse energy for low-end torque response. Compressor wheel inducer diameter ranges between 52 mm and 54 mm, while the turbine wheel inducer measures 70 mm. The compressor outlet diameter is 3 inches (76 mm) and the turbine inlet features a 4-inch (100 mm) diameter T4 divided flange. The wastegate is factory set to approximately 20 psi (1.4 bar) for OEM calibration. This assembly supersedes and interchanges with Holset part numbers 4045877, 4033987H, 3771454, 4049091, and 4047313. Cummins OEM cross-references include 2882034, 4033987, 4035199, and A3960454. It is commonly applied in Dongfeng Cummins heavy-duty trucks and Komatsu PC220 series excavators equipped with the B160 power unit.