
BRP 420665785 ECM電子控制模組總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 額定電壓 | 12V DC |
|---|---|
| 通訊協議 | CAN Bus (BRP BUDS/CanDoo) |
| 工作溫度範圍 | -40°C to +85°C |
| 防護等級 | IP67 |
| 聯結器型別 | BRP Specific Multi-Pin Sealed Connector |
| 發動機應用 | Rotax 1503 4-TEC Supercharged 215HP |
| 淨重 | 1.5 kg |
| 包裝尺寸 | 20 × 15 × 5 cm |
製造號
- 420665785
主機廠號
- 420665785
發動機號
- Rotax 1503 4-TEC 215HP
適配車型
- 2007 Sea-Doo GTX Ltd
- 2007 Sea-Doo GTX Wake
- 2007 Sea-Doo RXP Supercharged
- 2007 Sea-Doo RXT
The BRP 420665785 Electronic Control Module (ECM), also referenced as the Electronic Box or MCM Module, is the primary engine management computer for specific 2007 Sea-Doo 4-TEC personal watercraft. This unit processes inputs from crankshaft position, throttle position, manifold absolute pressure, and temperature sensors to calculate precise fuel injection duration and ignition advance curves for the Rotax 1503 4-TEC 215HP supercharged engine.
The module housing is a sealed, waterproof enclosure designed for the harsh marine environment, featuring a multi-pin connector interface specific to the BRP vehicle communication network. It contains non-volatile memory storing calibration maps, fault code history, and vessel identification data. This ECM supports diagnostic communication via the BRP BUDS/CanDoo protocol for dealer-level troubleshooting, software updates, and parameter monitoring.
Direct OEM replacement for Sea-Doo part number 420665785. Compatible with 2007 model year GTX Limited, GTX Wake, RXP Supercharged, and RXT models equipped with the 215HP Rotax 4-TEC powerplant. No programming required if replaced with same part number unit; VIN learning occurs automatically on first key cycle.
同系技術配件與配套推薦

BRP 271001719 傳動軸總成
271001719Brp

FG Wilson PCB650-091 發動機介面模組總成
PCB650-091Fg Wilson

康明斯 3030256 電路板總成
3030256Cummins

康明斯 3408501 電子控制模組
3408501Cummins

科勒 2558408 ECU 控制模組總成
2558408Kohler

ComAp I-AIO9/1 模擬量輸入輸出模組
Inteli AIO9/1Comap

Haulotte 4000024420 變速總成
4000024420Haulotte

Genie 吉尼 1257840 直流電機控制器 24V 360A
1257840Genie
