XZR8® 鑫眾潤
本田 51250-HR3-A20 前左轉向節總成

本田 51250-HR3-A20 前左轉向節總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
安裝位置Front Left
Assembly ComponentsBall Joint, Wheel Bearing, Seals
材質Ductile Iron
驅動配置4WD
OEM參考51250-HR3-A20
單位重量4.5 kg
包裝尺寸30 × 20 × 15 cm

製造號

  • 51250-HR3-A20
  • 51200-HR3-A20

主機廠號

  • 51250-HR3-A20
  • 51200-HR3-A20

適配車型

  • 2014-2026 Honda TRX420 Rancher 4x4
  • 2014-2015 Honda TRX420 Rancher 2x4
  • 2014-2019 Honda TRX500 Foreman 4x4
  • 2015-2019 Honda TRX500 Foreman Rubicon 4x4
  • 2020-2026 Honda TRX520 Foreman
The Honda 51250-HR3-A20 is a genuine OEM front left steering knuckle assembly designed for select Honda all-terrain and utility vehicles. This unit integrates the steering knuckle spindle, wheel hub bearing, seals, and lower ball joint in a pre-assembled configuration to reduce installation labor and ensure correct bearing preload. Constructed from high-strength ductile iron casting, the knuckle provides the structural pivot point for the front suspension and steering linkage. The assembly accommodates the front drive axle stub shaft and brake caliper mounting provisions. It is engineered for 4x4 driveline applications where the knuckle serves as the outer constant velocity joint housing. Direct OEM replacement for Honda part numbers 51250-HR3-A20 (left) and 51200-HR3-A20 (right). Verified fitment spans 2014-2026 TRX420 Rancher 4x4, 2014-2015 TRX420 Rancher 2x4, 2014-2019 TRX500 Foreman 4x4, 2015-2019 TRX500 Foreman Rubicon 4x4, and 2020-2026 TRX520 Foreman models. No modifications required for installation.