XZR8® 鑫眾潤
本田 53601-S9V-A01 動力轉向齒輪齒條總成
本田 53601-S9V-A01 動力轉向齒輪齒條總成 - Image 2
本田 53601-S9V-A01 動力轉向齒輪齒條總成 - Image 3
1 / 3

本田 53601-S9V-A01 動力轉向齒輪齒條總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
動力輔助型別Hydraulic
驅動配置Left-Hand Drive (LHD)
輸入軸直徑0.69 in (17.5 mm)
軸長1.94 in (49.3 mm)
安裝孔4
車輛上的放置位置Front
材質Steel/Aluminum
單位重量10.2 kg
包裝尺寸100 × 20 × 15 cm

製造號

  • 53601-S9V-A01
  • 53601S9VA01
  • 53601 S9V A01
  • PIJLS5
  • 1YDJRN

主機廠號

  • 53601-S9V-A01
  • 53601S9VA01
  • 53601 S9V A01
  • 53601-S9V-A02
  • 53601S9VA02
  • 06536-S9V-505RM

發動機號

  • Honda J35A 3.5L V6

互換號

  • 26-2719
  • 262719
  • 53601-S3V-A01
  • 53601S3VA01
  • 53010-S3V-A01

適配車型

  • Honda Pilot 2003-2008
  • Acura MDX 2003-2006
The 53601-S9V-A01 is a hydraulic power steering rack and pinion assembly designed for 2003-2008 Honda Pilot models equipped with the 3.5L J35A V6 engine. The unit features a left-hand drive configuration with an input shaft diameter of 0.69 inches (17.5 mm) and an input shaft length of 1.94 inches (49.3 mm). It utilizes a 4-bolt mounting pattern for direct attachment to the vehicle subframe. Constructed from steel and aluminum components, the assembly integrates the rack bar, pinion gear, hydraulic cylinder, and valve body into a single service unit. It replaces OEM part numbers 53601-S9V-A01, 53601S9VA01, and cross-references aftermarket numbers 26-2719 and 262719. The component weighs approximately 10.2 kg and is engineered to meet OE specifications for steering ratio, assist pressure, and internal leakage rates. Fitment extends to 2003-2008 Honda Pilot (all trims) with hydraulic power steering. Cross-vehicle compatibility includes 2003-2006 Acura MDX sharing the same steering gear architecture. Installation requires standard hydraulic system bleeding and alignment verification post-replacement.