XZR8® 鑫眾潤
中國重汽 5614830X 渦輪增壓器進油管總成

中國重汽 5614830X 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
元件型別Turbocharger Oil Feed Line / Supply Pipe
材質Carbon Steel Tube with Stainless Steel Braided Hose, Banjo Fittings
進氣管螺紋尺寸M14 x 1.5 (Engine Block Port)
出口螺紋尺寸M12 x 1.5 (Turbocharger Inlet Port)
總長度Approx. 420 mm
最大工作壓力4.0 MPa (580 psi)
工作溫度範圍-40°C to +150°C
密封方式Copper Crush Washers (Not Included)
淨重0.48 kg

製造號

  • 5614830X

主機廠號

  • 5614830X
  • 612630060082

發動機號

  • Sinotruk WD615.47
  • Sinotruk WD615.69
  • Sinotruk WD615.87
  • Sinotruk WD615.92
  • Weichai WP10.336
  • Weichai WP10.371

適配車型

  • Sinotruk HOWO 371 6x4 Dump Truck
  • Sinotruk HOWO 336 6x4 Tractor Truck
  • Sinotruk HOWO A7 420 6x4 Tractor
  • Sinotruk HOWO T7H 430 Prime Mover
The 5614830X turbocharger oil feed line is a critical component within the engine lubrication system, designed to deliver pressurized engine oil to the turbocharger center housing rotating assembly (CHRA). It is engineered to withstand high thermal loads and pressure cycles inherent in heavy-duty diesel applications. Constructed from high-temperature resistant steel tubing with stainless steel braided hose sections and crimped banjo fittings, this assembly ensures leak-free sealing at the engine block supply port and turbocharger inlet. The line routing is specific to the Sinotruk WD615 engine platform, accommodating the geometric constraints of the HOWO vehicle chassis. Installation requires new copper sealing washers at banjo connections to maintain system integrity.