XZR8® 鑫眾潤
卡特彼勒 5J4773 2J3506 5P8248 犁頭螺栓 螺母 墊圈 套件

卡特彼勒 5J4773 2J3506 5P8248 犁頭螺栓 螺母 墊圈 套件


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
螺紋尺寸3/4-10 UNC
螺栓長度2-1/2 in (63.5 mm)
Bolt Size3/4 in (19 mm)
扳手尺寸1-1/8 in
內徑3/4 in (19 mm)
材質40Cr Alloy Steel (Bolt), Carbon Steel (Nut/Washer)
等級Grade 8 / 10.9 / 12.9
硬度48-52 HRC
表面處理Black Oxide / Phosphate Coated
螺栓頭型Domed Plow Head with Square Neck
應用領域Cutting Edge / End Bit Mounting
淨重4.2 kg

製造號

  • 5J4773
  • 2J3506
  • 5P8248

主機廠號

  • 5J4773
  • 2J3506
  • 5P8248

互換號

  • 1D4835
  • 3F4397
  • 3F9384
  • 5J4771
  • T146934
  • 206158

適配車型

  • Caterpillar D6K
  • Caterpillar D6T
  • Caterpillar D7
  • Caterpillar 980M
  • Caterpillar 962K
  • Caterpillar 973
  • Caterpillar 320C
  • Caterpillar 325
  • Caterpillar 12K
  • Caterpillar 140K
  • John Deere 700K
  • John Deere 850K
  • Case 1650M
  • Case 2050M
This hardware kit contains 45 pieces comprising 15 sets of plow bolts (5J4773), hex nuts (2J3506), and flat washers (5P8248). Designed for securing cutting edges and end bits to blade moldboards on Caterpillar track-type tractors, wheel loaders, hydraulic excavators, and motor graders. The plow bolts feature a 3/4 inch diameter with 3/4-10 UNC coarse thread and 2-1/2 inch length under head. Manufactured from 40Cr alloy steel, heat treated to Grade 8 (10.9/12.9) hardness 48-52 HRC for high tensile strength and wear resistance in severe ground engaging applications. Square neck design prevents rotation during torque tightening. Hex nuts conform to 3/4-10 UNC thread specification with 1-1/8 inch wrench flats. Flat washers provide load distribution and prevent surface damage. All components meet OEM dimensional and metallurgical standards for direct replacement of Caterpillar part numbers 5J-4773, 2J-3506, and 5P-8248. Cross-reference interchange includes 1D4835, 3F4397, 3F9384, 5J4771, T146934, and 206158. Suitable for Caterpillar D6K, D6T, D7, 980M, 962K, 973, 320C, 325, 12K, 140K and compatible John Deere, Case, Dresser platforms.