XZR8® 鑫眾潤
濰柴 610800110180M1 渦輪增壓器總成

濰柴 610800110180M1 渦輪增壓器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
渦輪增壓器型別Variable Geometry Turbocharger (VGT)
執行器型別Pneumatic / Electronic (Model Dependent)
壓縮機誘導器直徑68 mm
壓縮機擴壓器直徑98 mm
渦輪誘導器直徑78 mm
渦輪出口直徑68 mm
渦輪機外殼A-R1.15
軸承系統Full Floating Journal & Thrust Bearing
潤滑方式Engine Oil Fed / Water Cooled Bearing Housing
油口螺紋M22 x 1.5
出口法蘭圖案4-Bolt Flange
壓縮機出口V-Band Clamp
渦輪進氣口V-Band Clamp / 4-Bolt Flange
渦輪出口4-Bolt Flange
最大增壓壓力3.5 bar
主軸轉速125,000 RPM
淨重18.5 kg
包裝尺寸45 × 35 × 35 cm

製造號

  • 610800110180M1
  • 3590040
  • 3590041

主機廠號

  • 610800110180M1

發動機號

  • Weichai WP12
  • Weichai WP13
  • Weichai WP12.4
  • Weichai WP13.5

互換號

  • HE400VG
  • HE451VE
  • K04-001

適配車型

  • Shaanxi Heavy Duty Truck X3000
  • Shaanxi Heavy Duty Truck F3000
  • Sinotruk Howo T7H
  • Sinotruk Howo T5G
  • Foton Auman EST
  • Weichai WP12 Generator Set
  • Weichai WP13 Marine Engine
The 610800110180M1 is a variable geometry turbocharger (VGT) assembly designed for Weichai WP12 and WP13 11.6L to 12.5L displacement diesel engines. It integrates a pneumatic or electronic actuator for precise boost pressure management across the engine operating map. The unit features a forged milled compressor wheel and high-temperature alloy turbine wheel housed within a cast iron turbine housing rated for sustained exhaust gas temperatures exceeding 850°C. The rotating assembly is supported by a full-floating journal bearing system with thrust bearing, lubricated and cooled by engine oil supply. This turbocharger is calibrated to match the specific compressor map and turbine A/R ratio requirements of the WP12/WP13 engine family for Euro III to Euro VI emission compliance. The cartridge (CHRA) is balanced to ISO 1940-1 G2.5 standards. The compressor cover includes a port for pressure ratio control solenoid connection. The turbine housing utilizes a V-band clamp or flanged connection for exhaust manifold mounting. Oil inlet typically M18x1.5 or M22x1.5 thread; oil outlet flanged with gasket surface. Coolant ports present on bearing housing for water-cooled applications. This assembly replaces the complete turbocharger unit; no separate actuator calibration required if supplied pre-set.