XZR8® 鑫眾潤
濰柴 612600111182 渦輪增壓器進油管總成

濰柴 612600111182 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
元件名稱Turbocharger Oil Inlet Pipe / Oil Feed Pipe
發動機應用Weichai WD615 Euro II Series
車輛平臺Sinotruk HOWO 6x4 Heavy Duty Truck
材質High-Temperature Alloy Steel Tubing with Forged Banjo Fittings
連線型別Banjo Bolt (Both Ends)
螺紋尺寸M14x1.5 or M16x1.5
外徑10mm - 12mm
功能Turbocharger Bearing Lubrication Supply
安裝位置Rear PTO Side / Engine Block to Turbocharger CHRA
淨重0.85 kg

製造號

  • 612600111182

主機廠號

  • 612600111182

發動機號

  • Weichai WD615.69
  • Weichai WD615.47
  • Weichai WD615.57
  • Weichai WD615 Euro II Series (336HP/371HP/410HP)

互換號

  • 612600113779

適配車型

  • Sinotruk HOWO 6x4 Dump Truck (336HP/371HP/410HP)
  • Sinotruk HOWO 6x4 Tractor Truck
  • Sinotruk HOWO 6x4 Tipper Truck
The 612600111182 turbocharger oil inlet pipe is engineered for Weichai WD615 Euro II series diesel engines (336HP, 371HP, 410HP variants) installed in Sinotruk HOWO 6x4 heavy duty truck platforms. This component channels pressurized engine oil from the block main gallery to the turbocharger center housing rotating assembly (CHRA) journal bearings. Constructed from high-temperature resistant steel tubing with precision-formed banjo end fittings, the assembly integrates sealing surfaces compatible with copper crush washers. The pipe routing is designed for the rear PTO (Power Take-Off) side oil intake configuration specific to the WD615 engine architecture. Critical dimensions include banjo bolt thread specification (typically M14x1.5 or M16x1.5 for WD615 platform) and tube outer diameter (approx. 10mm-12mm) to maintain required oil flow volume and pressure at rated engine speeds. OEM cross-reference confirms direct interchangeability with Weichai part number 612600111182. Installation requires torque specification adherence for banjo bolts (typically 25-35 Nm) to prevent leakage or fitting distortion. Regular inspection during scheduled maintenance intervals is recommended to verify line integrity and absence of fatigue cracking near flare joints.