XZR8® 鑫眾潤
Mopar 68366500AB 氮氧化物感測器
Mopar 68366500AB 氮氧化物感測器 - Image 2
Mopar 68366500AB 氮氧化物感測器 - Image 3
Mopar 68366500AB 氮氧化物感測器 - Image 4
1 / 4

Mopar 68366500AB 氮氧化物感測器


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
額定電壓12V
聯結器型別4-Pin Female
測量範圍0-21%
排氣後安裝Downstream (Post-SCR)
螺紋尺寸M18 x 1.5
探頭長度Approx 85 mm
工作溫度範圍-40 to 850 °C
響應時間< 2 seconds
加熱功率Approx 15W
淨重0.35 kg

製造號

  • 68366500AB
  • 68366500AC
  • 68366500AA

主機廠號

  • 68366500AB
  • 68366500AC

發動機號

  • Cummins 6.7L I6 Turbo Diesel

互換號

  • 5WK97361
  • 2851008
  • SENN-0060XF

適配車型

  • Ram 2500 (2019-2020)
  • Ram 3500 (2019-2020)
  • Ram 4500 (2019-2020)
  • Ram 5500 (2019-2020)
The Mopar 68366500AB nitrogen oxide sensor is an OEM emissions component designed for the selective catalytic reduction (SCR) system on 2019-2020 Ram 2500, 3500, 4500, and 5500 trucks equipped with the Cummins 6.7L I6 turbo diesel engine. This downstream sensor mounts post-SCR catalyst to monitor nitrogen oxide conversion efficiency. It operates on a 12-volt supply with a 4-pin female connector and communicates via CAN protocol to the engine control module. The sensor element utilizes a zirconia-based electrochemical cell with integrated heater for rapid light-off. Superseded by part number 68366500AC; both numbers are interchangeable. Cross-references Continental/VDO 5WK97361 and aftermarket equivalents including SENN-0060XF.