
康明斯 6CTA8.3 柴油發動機總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 適用發動機 | 6CTA8.3 / 6CTAA8.3 |
|---|---|
| 配置 | Inline 6-Cylinder, 4-Stroke |
| 排量 | 8.3 L (505 cu in) |
| 缸徑 X 行程 | 114 mm x 135 mm (4.49 in x 5.31 in) |
| 吸氣型別 | Turbocharged & Aftercooled (Air-to-Air) |
| 燃油系統 | Mechanical Direct Injection (Bosch P/MW Pump) |
| 調速器型別 | Mechanical (R801 / RSV) |
| 功率範圍 | 122-201 kW (164-270 hp) |
| 額定速度 | 1500-2500 rpm |
| 峰值扭矩 | 732-1085 Nm @ 1500 rpm |
| 壓縮比 | 17.3:1 |
| 乾重 | 680 kg (1499 lb) |
| 冷卻系統 | Water Cooled, Gear Driven Centrifugal Pump |
| 潤滑方式 | Full Pressure, Gear Pump, Spin-on Filters |
| 電氣系統 | 12V / 24V DC |
| 轉速 | Counter-Clockwise |
| 排放標準 | Tier 1 / Tier 2 / IMO Tier I-II (Variant Dependent) |
| 包裝尺寸 | 140 × 85 × 120 cm |
製造號
- 6CTA8.3
- 6CTAA8.3
- 6CTA8.3-C260
- 6CTA8.3-G2
- 6CTA8.3-M220
- JY640-G
主機廠號
- 3800883
- 3800884
- 3975628
- 3975629
發動機號
- Cummins 6CTA8.3
- Cummins 6CTAA8.3
- Cummins 6CTA8.3-C260
- Cummins 6CTA8.3-G2
- Cummins 6CTA8.3-M220
- Cummins ISC 8.3
- Cummins QSC 8.3
互換號
- 6BTA8.3
- JY640-G
- ISC 8.3
- QSC 8.3
適配車型
- Komatsu PC200-8 Excavator
- Hitachi ZX200-3 Excavator
- Caterpillar 320D Excavator
- Doosan DX225LC Excavator
- Hyundai R215-9 Excavator
- Diesel Generator Sets 144kW
- Marine Propulsion Vessels
- Heavy Forklifts FD300
- Wheel Loaders
- Bulldozers
The Cummins 6CTA8.3 is a four-stroke, inline six-cylinder, turbocharged and aftercooled diesel engine with a displacement of 8.3 liters (505 cubic inches). It features a bore of 114 mm and a stroke of 135 mm. The engine utilizes a mechanical fuel injection system (Bosch P-series or MW pump) with a mechanical governor, ensuring robust performance in extreme conditions. The single-piece crossflow cylinder head design maximizes durability and optimizes combustion. Replaceable wet cylinder liners allow for lower rebuild costs and longer service life.
This engine family covers multiple ratings from 122 kW (164 hp) to 201 kW (270 hp) at speeds of 1500-2500 rpm, suitable for construction machinery, generator sets, marine propulsion, and industrial applications. The lubrication system is a full-pressure, gear-driven pump with spin-on filters. Cooling is achieved via a gear-driven centrifugal water pump with thermostatic control. The electrical system supports both 12V and 24V starting and charging configurations. Dry weight is approximately 680 kg. Standard rotation is counter-clockwise viewed from the flywheel end.








