



1 / 4
雅馬哈 6R7-44517-00-8S 發動機減震橡膠支座
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 材質 | Oil-Resistant Rubber Elastomer |
|---|---|
| 安裝型別 | Engine Mount Isolator |
| 單位重量 | 0.23 kg |
| 數量 | 4 |
| 顏色 | Black |
| 替代型號 | 6R7-44517-00-9M |
| 包裝尺寸 | 12 × 10 × 7 cm |
製造號
- 6R7-44517-00-8S
- 6R7-44517-00-9M
主機廠號
- 6R7-44517-00-8S
- 6R7-44517-00-9M
發動機號
- Yamaha 650cc 2-Stroke
- Yamaha 701cc 2-Stroke
互換號
- 011-115
- 6R744517008S
- 6R744517009M
適配車型
- Yamaha SuperJet 650 1990-1993
- Yamaha SuperJet 700 1994-2016
- Rickter Hull SuperJet 650/701
The Yamaha 6R7-44517-00-8S engine mount rubber is a genuine OEM component designed to secure the powerplant within the hull of stand-up personal watercraft. Manufactured to factory specifications, this elastomeric isolator positions and supports the engine assembly while attenuating vibration transmitted to the hull structure and driveline components.
The mount replaces the superseded part number 6R7-44517-00-9M and is compatible with all round-bottom hull configurations. It fits Yamaha SuperJet 650 models from 1990 through 1993 and SuperJet 700 models from 1994 through 2016, as well as Rickter hulls utilizing the same 650cc and 701cc two-stroke powerplants. Each watercraft requires four mounts for complete engine installation.
Constructed from oil-resistant rubber compound, the mount withstands continuous exposure to engine heat, lubricants, and marine environments. Replacement of worn mounts prevents excessive engine movement that can accelerate wear on driveshaft couplings, bearings, and jet pump components. Installation follows OEM torque specifications per the applicable service manual.
同系技術配件與配套推薦

雅馬哈 62T-11400-02-00 曲軸總成
62T-11400-02-00Yamaha

雅馬哈 682-43112-02-8D 支架夾具套件
682-43112-02-8DYamaha

斗山 DH60-7 發動機減震墊總成
DH60-7Doosan

現代 14E701550 發動機懸置橡膠減震墊總成
14E701550Aftermarket

日立 4256314 4256313 發動機機腳墊減震膠總成
2416R145D2Hitachi Construction Machinery

悍馬 1232649 灑水泵支架減震塊
1232649Hamm

Lemforder 2173701 發動機懸置總成
2173701Lemforder

紐荷蘭 75204967 橡膠減震器
75204967New Holland
