XZR8® 鑫眾潤
Fletcher 735630002 壓力調節閥
Fletcher 735630002 壓力調節閥 - Image 2
1 / 2

Fletcher 735630002 壓力調節閥


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
埠尺寸1/8 inch
壓力範圍0-8 bar
媒體型別Compressed Air
機體材料Aluminum Alloy
密封材料NBR
調整型別Locking Knob
減速型別Non-Relieving
安裝配置In-line / Manifold
淨重0.45 kg

製造號

  • 735630002
  • 41-599
  • ALF735630002

主機廠號

  • 735630002

適配車型

  • Fletcher FrameMaster Point Driver
  • Fletcher GlazierMaster Point Driver
  • Mitre-Mite VN42 Underpinner
  • Alfamacchine Minigraf Underpinner
The Fletcher 735630002 is a pneumatic pressure regulator designed for use in picture framing underpinners and V-nail drivers. It features a 1/8 inch inlet/outlet port connection and an adjustable output pressure range of 0 to 8 bar. The regulator body is constructed from aluminum alloy with internal brass and stainless steel components, sealed with NBR elastomers suitable for compressed air service. It incorporates a non-relieving diaphragm design with a locking adjustment knob for pressure setting stability. This component mounts directly on the machine pneumatic manifold or frame to control the driving force applied to V-nails. Cross-reference interchange includes Fletcher product number 41-599 and Alfamacchine part number ALF735630002. It serves as a direct replacement for the factory-installed regulator on Fletcher FrameMaster and GlazierMaster point drivers, Mitre-Mite VN42 underpinners, and Alfamacchine Minigraf series machines. Installation requires standard pneumatic fittings and thread sealant. Maintenance involves periodic inspection for air leakage at the adjustment cap and relief port, with repair kits available separately for diaphragm and seal replacement.