XZR8® 鑫眾潤
Garrett 786137-0003 渦輪增壓器總成

Garrett 786137-0003 渦輪增壓器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
渦輪增壓器型號GTB1549V
加特可零件編號786137-0003
驅動型別Electronic Wastegate Actuator
Variable GeometryYes (VGT)
發動機排量2.0L
燃油型別Diesel
排放標準Euro 5 / Euro 6
渦輪輪材料Inconel 713C (High Nickel Alloy)
壓縮機輪型別Extended Tip / Billet (OE Spec)
軸承系統Journal Bearing / Thrust Bearing
潤滑型別Engine Oil Fed / Water Cooled
旋轉方向Clockwise (Viewed from Compressor Side)
淨重7.5 kg
包裝尺寸35 × 25 × 25 cm

製造號

  • 786137-0001
  • 786137-0003
  • 786137-5001S
  • 786137-5003S
  • 786137-5005S
  • 786137-9003W

主機廠號

  • 55566448
  • 55570748
  • 55581063
  • 5860381
  • 95519811
  • 860335

發動機號

  • GM A20DTH
  • GM A20DT
  • Opel 2.0 CDTI
  • Vauxhall 2.0 CDTI
  • Chevrolet 2.0L Diesel Ecotec

互換號

  • 5860381
  • 786137-3
  • 786137-3EA
  • GTB1549V

適配車型

  • Opel Insignia 2.0 CDTI (2010-2016)
  • Opel Astra J 2.0 CDTI (2010-2015)
  • Opel Zafira Tourer C 2.0 CDTI (2011-2016)
  • Vauxhall Insignia 2.0 CDTI (2010-2016)
  • Vauxhall Astra 2.0 CDTI (2010-2015)
  • Vauxhall Zafira 2.0 CDTI (2011-2016)
  • Chevrolet Cruze 2.0L Diesel (2012-2015)
  • Chevrolet Malibu 2.0L Diesel (2013-2015)
  • Saab 9-5 2.0 CDTI (2010-2012)
The Garrett 786137-0003 is a GTB1549V series variable geometry turbocharger designed for the General Motors 2.0L CDTI Ecotec diesel engine (codes A20DTH, A20DT). It features an electronic wastegate actuator for precise boost control across the operating range. The unit utilizes a pneumatic/electronic actuation strategy depending on specific vehicle calibration. Core assembly includes a high-nickel alloy turbine wheel (Inconel 713C equivalent) and extended tip compressor wheel for improved efficiency at high pressure ratios. This turbocharger serves as direct replacement for OEM part numbers 55566448, 55570748, 55581063, 5860381, and 95519811. Applications cover model years 2010-2016 for Opel Insignia, Astra J, Zafira Tourer; Vauxhall Insignia, Astra, Zafira; and Chevrolet Cruze (Gen 1) 2.0L Diesel. Installation requires new gasket kit and oil feed line inspection to prevent premature bearing failure. Balanced to ISO 1940-1 G2.5 standard.