



1 / 4
CNH工業 87605245 電位計位置感測器總成
極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
| 電阻值 | 4000 Ohm |
|---|---|
| 供電電壓 | 13.5 VDC |
| 感測器型別 | Rotary Potentiometer |
| 寬度 | 26.7 mm |
| 功能 | Throttle / Hitch Position Sensing |
| 訊號輸出 | Analog Resistance |
| 淨重 | 0.15 kg |
| 包裝尺寸 | 10 × 8 × 5 cm |
製造號
- 87605245
- L78.2890
主機廠號
- 87605245
- 82021035
- 87543715
- 87559698
- 87559705
- 82017877
- 82018521
- 82021037
- 87605246
- 82007044
- 82011878
發動機號
- Briggs & Stratton 140432-0145-A1
- Briggs & Stratton 135232-0311-01
適配車型
- Case IH Farmall 100C
- Case IH JX1070U
- Case IH JX1090U
- Case IH Maxxum 135
- Case IH MXU110
- New Holland TL70
- New Holland TL80
- New Holland TL90
- New Holland T4020
- New Holland T4030
- New Holland TM190
- New Holland T6030
- New Holland TS110
The 87605245 is a rotary angle position sensor (potentiometer) designed for precise measurement of throttle lever and rear three-point hitch position on CNH Industrial agricultural tractors. It converts mechanical angular displacement into a proportional electrical resistance signal for the electronic control unit (ECU).
The sensor features a 4000 Ohm resistive element rated for 13.5 VDC supply voltage. The housing width measures 26.7 mm. It mounts directly onto the throttle linkage or hitch draft control assembly. The component is engineered for durability in agricultural environments, resisting vibration, dust, and temperature extremes typical of tractor operation.
This part supersedes multiple legacy CNH part numbers including 82021035, 87543715, and 87605246. It is a direct replacement for factory-installed sensors on compatible Case IH and New Holland models equipped with Briggs & Stratton power units.
同系技術配件與配套推薦

CNH工業 82019691 轉角感測器
BYT-NAG1224Cnh Industrial

豐田 90919-05034 曲軸位置感測器
90919-05034Toyota

Skyjack 220597 角度感測器
220597Skyjack

永恆力 50047325 起升電位器感測器總成
50047325Jungheinrich

林德 3723604705 電位器
3723604705Linde

約翰迪爾 RE261356 位置感測器
RE261356John Deere

梅賽德斯-賓士 A0045429918 車身高度感測器
A0045429918Aftermarket

林德 3723604700 電位器總成
3723604700Linde
