XZR8® 鑫眾潤
豐田 89541-60C00 ABS制動執行器泵總成

豐田 89541-60C00 ABS制動執行器泵總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
工作電壓12V DC
制動液型別DOT 3 / DOT 4
液壓通道4-Channel
液壓介面螺紋M10 x 1.0 / M12 x 1.0 (Flared)
外殼材料Aluminum Alloy / Engineering Polymer
安裝型別Bolt-On Chassis Mount
聯結器型別OEM Specific Multi-Pin
淨重4.5 kg
包裝尺寸35 × 25 × 20 cm

製造號

  • 89541-60C00
  • 8954160C00

主機廠號

  • 89541-60C00
  • 8954160C00
  • 47050-60012
  • 47050-60140
  • 4705060012
  • 4705060010
  • 4702560022
  • 4702560020

發動機號

  • Toyota 1GR-FE 4.0L V6

適配車型

  • Toyota Land Cruiser LC200 (URJ202)
  • Toyota Land Cruiser Prado
The ABS brake actuator pump assembly (part number 89541-60C00) is the hydraulic control unit responsible for modulating brake fluid pressure during anti-lock braking events. It integrates the hydraulic modulator, pump motor, and solenoid valves into a single compact unit mounted on the vehicle chassis. This unit is engineered for the Toyota Land Cruiser 200 Series (URJ202) equipped with the 4.0L 1GR-FE V6 gasoline engine. It manages four-channel brake pressure control across front and rear axles, ensuring directional stability and reduced stopping distances on low-friction surfaces. The assembly interfaces with the vehicle ECU via a dedicated connector and connects to the brake master cylinder and wheel calipers through standard flared hydraulic ports. Construction features an aluminum alloy housing with high-temperature resistant engineering polymer reservoir components. Internal components include a DC motor-driven pump, inlet/outlet solenoid valves, and pressure sensors. Service replacement requires brake system bleeding and ABS ECU initialization using diagnostic equipment. Compatible with OEM references 47050-60012 and 47050-60140.