XZR8® 鑫眾潤
五十鈴 8973286446 8973286426 凸輪軸總成套裝

五十鈴 8973286446 8973286426 凸輪軸總成套裝


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
曲軸配置Overhead Camshaft (OHC)
配置Dual Camshaft Set (Intake + Exhaust)
材質Forged Alloy Steel (SCM420 Equivalent)
軸頸直徑46.0 mm
凸輪軸提升進氣8.2 mm
葉輪提升排氣8.0 mm
進氣持續時間050228°
050時排氣持續時間232°
表面硬度58-62 HRC
表面粗糙度Ra ≤ 0.2 µm
Timing Chain DrivenTiming Chain Driven
發動機應用Isuzu 4JJ1 3.0L Diesel
淨重6.5 kg
包裝尺寸62 × 16 × 12 cm

製造號

  • 8973286446
  • 8973286426
  • 8-97328-644-6
  • 8-97328-642-6
  • WW10227
  • WW10226

主機廠號

  • 8973286446
  • 8973286426
  • 8-97328-644-6
  • 8-97328-642-6

發動機號

  • Isuzu 4JJ1

互換號

  • WW10227
  • WW10226

適配車型

  • Isuzu TFR
  • Isuzu TFS
  • Isuzu UCS
  • Isuzu UCR
  • Isuzu D-Max
  • Isuzu Mu-X
This camshaft set comprises exhaust camshaft 8973286446 and intake camshaft 8973286426, engineered for Isuzu 4JJ1 3.0L common-rail diesel engines. Both shafts are manufactured from high-grade alloy steel with induction-hardened lobes and journals to withstand high-contact stresses and ensure precise valve lift profiles. The exhaust camshaft (8973286446) features optimized lobe geometry for improved exhaust scavenging and emissions compliance. The intake camshaft (8973286426) is calibrated for maximum volumetric efficiency across the operating RPM range. Each shaft undergoes CNC grinding to IT5 tolerance class, followed by micropolishing to achieve surface roughness Ra ≤ 0.2 µm on bearing journals. Direct OEM replacement for Isuzu part numbers 8-97328-644-6 and 8-97328-642-6. Compatible with TFR, TFS, UCS, UCR, D-Max, and Mu-X vehicle platforms equipped with 4JJ1 engine. Supplied as matched pair to maintain valve timing synchronization. Cross-references aftermarket codes WW10227 (exhaust) and WW10226 (intake).