XZR8® 鑫眾潤
卡特彼勒 9Y9431 空氣粗濾器總成
卡特彼勒 9Y9431 空氣粗濾器總成 - Image 2
卡特彼勒 9Y9431 空氣粗濾器總成 - Image 3
1 / 3

卡特彼勒 9Y9431 空氣粗濾器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
進氣內徑3.125 in (79 mm)
進氣直徑3 in
高度6.17 in (156.7 mm)
最大外徑7.34 in (186.5 mm)
出口內徑3.02 in (76.71 mm)
重量0.45 kg (1 lb)
材質Plastic
包裝尺寸20 × 20 × 18 cm

製造號

  • 9Y9431
  • 9Y-9431
  • 8H2021
  • 1S5159
  • 9Y9433
  • 3Y1603
  • 7F7562
  • 9F0904
  • V9Y9431
  • CA9Y9431

主機廠號

  • 9Y9431
  • 8H2021
  • 1S5159
  • 9Y9433
  • 3Y1603
  • 7F7562
  • 9F0904

發動機號

  • Caterpillar 3046

互換號

  • Donaldson P136115
  • Fleetguard AP3000
  • AIC 9Y9431-AIC
  • Tornado 9Y9431
  • CTP 9Y9431

適配車型

  • Caterpillar 416B
  • Caterpillar 428B
  • Caterpillar CP-323C
  • Caterpillar CS-323C
  • Caterpillar 933
  • Caterpillar 933C
  • Caterpillar D3C III
  • Caterpillar D3G
  • Caterpillar D4C III
  • Caterpillar D4G
  • Caterpillar RT50
  • Caterpillar RT50SA
  • Caterpillar RT60
  • Caterpillar RTC60
The Caterpillar 9Y9431 air precleaner assembly is a centrifugal separation device designed to remove large dust and debris particles before they reach the primary engine air filter. It features a 3-inch (76 mm) nominal intake size with an inlet inner diameter of 3.125 inches (79 mm) and an outlet inner diameter of 3.02 inches (76.71 mm). The unit stands 6.17 inches (156.7 mm) tall with a maximum body diameter of 7.34 inches (186.5 mm). Constructed from high-strength plastic, it weighs approximately 0.45 kg (1 lb). This precleaner assembly serves as a direct replacement for Caterpillar OEM part numbers 9Y9431, 8H2021, 1S5159, 9Y9433, 3Y1603, 7F7562, and 9F0904. It is compatible with a wide range of Caterpillar equipment including backhoe loaders (416B, 428B), compact track loaders (323C, 933, 933C), small track-type tractors (D3C III, D3G, D4C III, D4G), and vibratory compactors (RT50, RT50SA, RT60, RTC60). The device mounts vertically on the air intake stack to provide efficient pre-filtration, reducing primary filter loading and extending service intervals in heavy dust environments.