XZR8® 鑫眾潤
合力 A21B4-32241 後轉向輪轂總成
合力 A21B4-32241 後轉向輪轂總成 - Image 2
合力 A21B4-32241 後轉向輪轂總成 - Image 3
合力 A21B4-32241 後轉向輪轂總成 - Image 4
1 / 4

合力 A21B4-32241 後轉向輪轂總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
材質Cast Iron
螺栓孔數量8
孔徑14 mm
花鍵型別OEM Internal Spline
淨重3.25 kg
表面處理Zinc-plated / Powder-coated
包裝尺寸30 × 20 × 20 cm

製造號

  • A21B4-32241
  • A21B432241
  • A21B4-32241Z

主機廠號

  • A21B4-32241
  • 214A4-32041
  • 30CX420001
  • F31A4-32051
  • 8003420000

互換號

  • 10452-301
  • ZXLG-004A

適配車型

  • Heli H2000 Series
  • Heli K Series
  • Heli CPCD20
  • Heli CPCD25
  • Heli CPCD30
  • Heli CPCD35
  • TCM FD20-30Z5/T6/T3/V
  • Baoli CPCD20-30
The A21B4-32241 rear steering hub is manufactured to Heli OEM specifications for the steering axle assembly. It features precision-machined internal splines for secure engagement with the steering column shaft, a flat steering wheel mounting flange, and an 8-hole bolt pattern with 14 mm hole diameter matching the OEM pattern. Constructed from cast iron for high strength and wear resistance under heavy steering loads, this hub serves as the critical interface between the steering wheel and the steering axle on 2-3.5 ton internal combustion forklifts. Direct replacement for Heli part numbers A21B4-32241, 214A4-32041, and 30CX420001. Compatible with Heli H2000 series, K series, and CPCD20-35 models, as well as TCM FD20-30 and Baoli CPCD20-30 series sharing the same steering axle configuration.