XZR8® 鑫眾潤
約翰迪爾 AT85174 機油壓力開關
約翰迪爾 AT85174 機油壓力開關 - Image 2
約翰迪爾 AT85174 機油壓力開關 - Image 3
約翰迪爾 AT85174 機油壓力開關 - Image 4
1 / 4

約翰迪爾 AT85174 機油壓力開關


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
螺紋尺寸1/8 inch NPT
螺紋尺寸M10 x 1.5 mm
端子型別1/4 inch Spade
端子數量1
額定電壓12V DC
開關配置SPST Normally Closed
總長度2.595 inch (65.9 mm)
重量0.14 lbs (0.064 kg)
安裝位置Engine Oil Gallery / Block Port
功能Engine Oil Pressure Monitoring and Warning Signal

製造號

  • AIPICO-93
  • A-AT85174

主機廠號

  • AT85174
  • AR27977
  • A139474
  • A162297
  • D63294
  • AF3882R
  • RE515669

互換號

  • S.58821
  • 997070
  • A162297-A
  • AR27977-A
  • AT85174-A

適配車型

  • John Deere 310G Backhoe Loader
  • John Deere 310SG Backhoe Loader
  • John Deere 315SG Backhoe Loader
  • John Deere 2240 Tractor
  • John Deere 2250 Tractor
  • John Deere 2300 Tractor
  • John Deere 2350 Tractor
  • John Deere 2550 Tractor
  • John Deere 2750 Tractor
  • John Deere 2755 Tractor
  • John Deere 2950 Tractor
  • John Deere 2955 Tractor
  • John Deere 3055 Tractor
  • John Deere 3150 Tractor
  • John Deere 3155 Tractor
  • John Deere 3255 Tractor
  • John Deere 300D Articulated Dump Truck
  • John Deere 6300 Tractor
  • Case 4490 Tractor
  • Case 4690 Tractor
  • Case 4890 Tractor
  • Case 1835 Skid Steer Loader
  • Case 1835B Skid Steer Loader
  • Case 1835C Skid Steer Loader
  • TYM T580 Tractor
  • TYM T700 Tractor
  • Hitachi DX75 Excavator
  • Hitachi DX75L Excavator
  • Hitachi DX75M Excavator
The AT85174 oil pressure switch is an engine-mounted sensor designed to monitor lubrication system pressure and activate warning indicators when pressure falls below safe thresholds. It installs directly into the engine block oil gallery port using a 1/8 inch NPT tapered pipe thread. The switch incorporates a single-pole single-throw electrical contact with a 1/4 inch spade terminal for harness connection. Rated for 12 volt DC systems, the component operates as a normally closed switch that opens at calibrated pressure setpoint. Housing is constructed from brass and steel with elastomeric seals for oil resistance. Overall length measures approximately 2.595 inches. This switch serves as a direct replacement for John Deere OEM part numbers across multiple tractor and construction equipment platforms.