XZR8® 鑫眾潤
White Drive Products BM1C0125 液壓擺線馬達

White Drive Products BM1C0125 液壓擺線馬達


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
排量125 cc/rev (7.63 in³/rev)
電機型別Gerotor Orbital Hydraulic Motor
安裝法蘭SAE A 2-Bolt
埠配置Side Ports, G 1/2 or 7/8-14 UNF O-Ring Boss
輸出軸1 inch Straight Keyed or 1 inch 6B Spline (C0 Config)
額定壓力140 bar (2030 psi)
峰值壓力175 bar (2540 psi)
最大流量60 L/min (15.8 GPM)
最大持續扭矩278 Nm (2460 in-lbs)
旋轉方向Bi-directional
重量5.6 kg (12.3 lbs)
包裝尺寸25 × 15 × 15 cm

製造號

  • BM1C0125

互換號

  • WM125
  • OMP 125
  • MP 125
  • RS 125
The BM1C0125 is a medium-duty hydraulic orbital motor utilizing a gerotor gear set architecture. It features a nominal displacement of 125 cm³/rev (7.63 in³/rev) and is engineered as a direct dimensional and functional replacement for the White Drive Products WM series 125 frame size, as well as the Danfoss Char-Lynn OMP 125 and M+S Hydraulic MP 125 series. The motor housing incorporates a two-bolt SAE A mounting flange configuration with standard side ports (typically G 1/2 or 7/8-14 UNF O-ring boss). Output shaft options for the C0 designation typically include a 1-inch straight keyed shaft or 1-inch 6B spline. Rated continuous operating pressure is 140 bar (2030 psi) with peak intermittent pressure up to 175 bar (2540 psi). Maximum continuous flow rating is 60 L/min (15.8 GPM), delivering a theoretical torque output of approximately 278 Nm (2460 in-lbs) at rated pressure. The unit weighs approximately 5.6 kg (12.3 lbs) and is suited for skid steer loader attachments, auger drives, conveyor drives, and agricultural implement rotation.