XZR8® 鑫眾潤
中國重汽 BY1006316067 渦輪增壓器進油管總成

中國重汽 BY1006316067 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
零件型別Turbocharger Oil Feed Line Assembly
OE參考BY1006316067
軟管材料PTFE Inner Tube / Stainless Steel Braid / Synthetic Rubber Cover
接頭型別Banjo Bolt (Both Ends)
螺紋直徑M14 x 1.5 / M16 x 1.5 (Application Specific)
密封方式Copper Crush Washers (Included)
最大工作壓力1.5 MPa (217 PSI)
溫度範圍-40°C to +150°C
總長度Approx. 450-600 mm (Variable per Chassis)
淨重0.65 kg
包裝尺寸35 × 22 × 10 cm

製造號

  • BY1006316067

主機廠號

  • BY1006316067

發動機號

  • Weichai WP10
  • Weichai WP12
  • Weichai WP13
  • Sinotruk MC11
  • Sinotruk MC13

適配車型

  • Sinotruk Howo 371
  • Sinotruk Howo 420
  • Sinotruk Howo A7
  • Sinotruk Howo T7H
  • Sinotruk Sitrak C7H
The BY1006316067 turbocharger oil feed line assembly is engineered to deliver pressurized engine oil to the turbocharger bearing cartridge on Sinotruk Howo series heavy-duty commercial vehicles. The assembly consists of a high-temperature resistant inner tube reinforced with stainless steel braiding, terminated with precision-machined steel banjo fittings and integrated copper sealing washers. Designed for compatibility with Weichai WP10, WP12, WP13 and Sinotruk MC11, MC13 diesel engines equipped with Holset or BorgWarner turbochargers. The line withstands continuous operating pressures up to 1.5 MPa and peak temperatures exceeding 150°C. Installation requires torque specification adherence for banjo bolts (typically 25-30 Nm) to prevent leakage at the turbocharger center housing and engine block supply port. This component is critical for maintaining turbocharger rotor dynamics and preventing bearing starvation failure.