XZR8® 鑫眾潤
陝汽 BY612600112476 渦輪增壓器進油管總成

陝汽 BY612600112476 渦輪增壓器進油管總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
OEM編號612600112476
元件型別Turbocharger Oil Inlet Pipe / Oil Feed Line
材質High-Temperature Alloy Steel / Stainless Steel Fittings
應用領域Weichai WP10 Series Diesel Engine
車輛平臺Shacman Heavy Duty Truck (X3000, F3000, H3000, X5000)
連線型別Banjo Fitting / Flared Tube End (Engine Block & Turbo Housing)
外徑10 mm / 12 mm
最大工作壓力1.0 MPa (145 PSI)
工作溫度範圍-40°C to +180°C
密封方式Copper Crush Washer / Metal Seal Ring
淨重0.45 kg
包裝尺寸35 × 12 × 6 cm

製造號

  • BY612600112476
  • 612600112476

主機廠號

  • 612600112476
  • BY612600112476

發動機號

  • Weichai WP10
  • Weichai WP10.340E22
  • Weichai WP10.380E22
  • Weichai WP10H

適配車型

  • Shacman X3000
  • Shacman F3000
  • Shacman H3000
  • Shacman X5000
The BY612600112476 turbocharger oil inlet pipe is a critical lubrication system component engineered for Shacman heavy-duty commercial vehicles equipped with Weichai WP10 series diesel engines. It channels pressurized engine oil from the main gallery to the turbocharger center housing rotating assembly (CHRA), ensuring hydrodynamic bearing lubrication and cooling under high thermal loads. Constructed from high-temperature resistant steel tubing with precision-formed flared or banjo fittings, this assembly withstands engine oil pressures up to 1.0 MPa and continuous operating temperatures exceeding 150°C. The pipe routing is designed to clear engine block casting, exhaust manifold, and accessory drive components while minimizing vibration-induced fatigue. Direct OEM replacement for Shacman part number BY612600112476 and Weichai core number 612600112476.