XZR8® 鑫眾潤
Holset C5350123 渦輪增壓器總成
Holset C5350123 渦輪增壓器總成 - Image 2
1 / 2

Holset C5350123 渦輪增壓器總成


極速免費配送
三年官方質保
90天無憂退換
24/7 全天候客服
渦輪增壓器型號HE400VG
執行器型別Electronic Variable Geometry (VGT)
壓縮機誘導器直徑63.5 mm
壓縮機擴壓器直徑98 mm
渦輪輪直徑78 mm
渦輪機外殼A-R1.15
進風口法蘭型別V-Band
出口法蘭型別V-Band
油料進油螺紋M14 x 1.5
油排型別Flange Mount
冷卻液介面Yes (Water-Cooled Bearing Housing)
淨重18.5 kg
包裝尺寸45 × 35 × 35 cm

製造號

  • C5350123
  • 5501252NX

主機廠號

  • C5350123
The Holset C5350123 is a variable geometry turbocharger (VGT) assembly designed for Cummins medium-to-heavy duty diesel engines, specifically integrated within the Dongfeng Cummins joint venture product line. This unit utilizes the HE400VG platform, incorporating an electronic actuator for precise vane position control, enabling rapid transient response and effective exhaust gas recirculation (EGR) management across the engine operating map. The compressor wheel and turbine wheel are engineered for high aerodynamic efficiency at elevated pressure ratios typical of Euro IV/V emission standards. The bearing system employs a full-floating journal bearing and thrust bearing arrangement, lubricated and cooled by engine oil supply. The center housing rotating assembly (CHRA) is balanced to strict OEM specifications to ensure minimal vibration and long service life under heavy-duty cycling conditions. This assembly serves as a direct replacement for the original equipment turbocharger on applicable Cummins ISLe and QSL engine platforms installed in Dongfeng heavy-duty truck chassis. Installation requires verification of the actuator calibration code and proper torque procedures for the V-band clamps and oil feed/drain connections.